HTS - Section Fifteen

Section Fifteen:
Base Metals and Articles of Base Metal

HTS Number	Indent	Description	Unit of Quantity	General Rate of Duty	Special Rate of Duty	Column 2 Rate of Duty	Quota Quantity	Additional Duties
	1	I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
7201	0	Pig iron and spiegeleisen in pigs, blocks or other primary forms:
7201.10.00.00	1	Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus	[“t”]	Free		$1.11/t
7201.20.00.00	1	Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus	[“t”]	Free		$1.11/t
7201.50	1	Alloy pig iron; spiegeleisen:
7201.50.30.00	2	Alloy pig iron	[“t”]	Free		$1.11/t
7201.50.60.00	2	Spiegeleisen	[“t”]	Free		0.5%
7202	0	Ferroalloys:
	1	Ferromanganese:
7202.11	2	Containing by weight more than 2 percent of carbon:
7202.11.10.00	3	Containing by weight more than 2 percent but not more than 4 percent of carbon	[“kg”,”Mn kg”]	1.4%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	6.5%
7202.11.50.00	3	Containing by weight more than 4 percent of carbon	[“kg”,”Mn kg”]	1.5%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	10.5%
7202.19	2	Other:
7202.19.10.00	3	Containing by weight not more than 1 percent of carbon	[“kg”,”Mn kg”]	2.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	22%
7202.19.50.00	3	Containing by weight more than 1 percent but not more than 2 percent of carbon	[“kg”,”Mn kg”]	1.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	6.5%
	1	Ferrosilicon:
7202.21	2	Containing by weight more than 55 percent of silicon:
	3	Containing by weight more than 55 percent but not more than 80 percent of silicon:
7202.21.10.00	4	Containing by weight more than 3 percent of calcium	[“kg”,”Si kg”]	1.1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	11.5%
7202.21.50.00	4	Other	[“kg”,”Si kg”]	1.5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	11.5%
7202.21.75.00	3	Containing by weight more than 80 percent but not more than 90 percent of silicon	[“kg”,”Si kg”]	1.9%	Free (A+,AU,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	9%
7202.21.90.00	3	Containing by weight more than 90 percent of silicon	[“kg”,”Si kg”]	5.8%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
7202.29.00	2	Other		Free		4.4¢/kg on silicon content
7202.29.00.10	3	Containing by weight over 2 percent of magnesium	[“kg”,”Si kg”]
7202.29.00.50	3	Other	[“kg”,”Si kg”]
7202.30.00.00	1	Ferrosilicon manganese	[“kg”,”Mn kg”]	3.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	23%
	1	Ferrochromium:
7202.41.00.00	2	Containing by weight more than 4 percent of carbon	[“kg”,”Cr kg”]	1.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	7.5%
7202.49	2	Other:
7202.49.10.00	3	Containing by weight more than 3 percent of carbon	[“kg”,”Cr kg”]	1.9%	Free (A+,AU,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	7.5%
7202.49.50	3	Other		3.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	30%
7202.49.50.10	4	Containing by weight more than 0.5 percent of carbon	[“kg”,”Cr kg”]
7202.49.50.90	4	Other	[“kg”,”Cr kg”]
7202.50.00.00	1	Ferrosilicon chromium	[“kg”,”Cr kg”]	10%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7202.60.00.00	1	Ferronickel	[“kg”,”Ni kg”]	Free		6.6¢/kg
7202.70.00.00	1	Ferromolybdenum	[“kg”,”Mo kg”]	4.5%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	31.5%
7202.80.00.00	1	Ferrotungsten and ferrosilicon tungsten	[“kg”,”W kg”]	5.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
	1	Other:
7202.91.00.00	2	Ferrotitanium and ferrosilicon titanium	[“kg”]	3.7%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7202.92.00.00	2	Ferrovanadium	[“kg”,”V kg”]	4.2%	Free (A+,AU,BH,CL,CO,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7202.93	2	Ferroniobium:
7202.93.40.00	3	Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon	[“kg”]	5%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7202.93.80.00	3	Other	[“kg”]	5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7202.99	2	Other:
7202.99.10.00	3	Ferrozirconium	[“kg”]	4.2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7202.99.20.00	3	Calcium silicon	[“kg”]	5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7202.99.80	3	Other		5%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7202.99.80.20	4	Ferrophosphorus	[“kg”]
7202.99.80.40	4	Other	[“kg”]
7203	0	Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms:
7203.10.00.00	1	Ferrous products obtained by direct reduction of iron ore	[“t”]	Free		$2.21/t
7203.90.00.00	1	Other	[“t”]	Free		$2.21/t
7204	0	Ferrous waste and scrap; remelting scrap ingots of iron or steel:
7204.10.00.00	1	Waste and scrap of cast iron	[“t”]	Free		74¢/t
	1	Waste and scrap of alloy steel:
7204.21.00.00	2	Of stainless steel	[“t”]	Free		74¢/t
7204.29.00.00	2	Other	[“t”]	Free		74¢/t
7204.30.00.00	1	Waste and scrap of tinned iron or steel	[“t”]	Free		Free
	1	Other waste and scrap:
7204.41.00	2	Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles		Free		74¢/t
7204.41.00.20	3	No. 1 bundles	[“t”]
7204.41.00.40	3	No. 2 bundles	[“t”]
7204.41.00.60	3	Borings, shovelings and turnings	[“t”]
7204.41.00.80	3	Other	[“t”]
7204.49.00	2	Other		Free		74¢/t
7204.49.00.20	3	No. 1 heavy melting	[“t”]
7204.49.00.40	3	No. 2 heavy melting	[“t”]
	3	Other:
7204.49.00.60	4	Cut plate and structural	[“t”]
7204.49.00.70	4	Shredded	[“t”]
7204.49.00.80	4	Other	[“t”]
7204.50.00.00	1	Remelting scrap ingots	[“t”]	Free		74¢/t
7205	0	Granules and powders, of pig iron, spiegeleisen, iron or steel:
7205.10.00.00	1	Granules	[“kg”]	Free		3%
	1	Powders:
7205.21.00.00	2	Of alloy steel	[“kg”]	Free		45%
7205.29.00.00	2	Other	[“t”]	Free		$2.21/t
	1	II. IRON AND NONALLOY STEEL
7206	0	Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):
7206.10.00.00	1	Ingots	[“kg”]	Free		20%
7206.90.00.00	1	Other	[“kg”]	Free		20%
7207	0	Semifinished products of iron or nonalloy steel:
	1	Containing by weight less than 0.25 percent of carbon:
7207.11.00.00	2	Of rectangular (including square) cross section, the width measuring less than twice the thickness	[“kg”]	Free		20%
7207.12.00	2	Other, of rectangular (other than square) cross section		Free		20%
7207.12.00.10	3	Having a width measuring less than four times the thickness	[“kg”]
7207.12.00.50	3	Having a width measuring at least four times the thickness	[“kg”]
7207.19.00	2	Other		Free		20%
7207.19.00.30	3	Of circular cross section	[“kg”]
7207.19.00.90	3	Other	[“kg”]
7207.20.00	1	Containing by weight 0.25 percent or more of carbon		Free		20%
	2	Of rectangular (including square) cross section:
7207.20.00.25	3	Having a width measuring less than four times the thickness	[“kg”]
7207.20.00.45	3	Having a width measuring at least four times the thickness	[“kg”]
7207.20.00.75	2	Of circular cross section	[“kg”]
7207.20.00.90	2	Other	[“kg”]
7208	0	Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
7208.10	1	In coils, not further worked than hot-rolled, with patterns in relief:
7208.10.15.00	2	Pickled	[“kg”]	Free		0.4¢/kg + 20%
	2	Other:
7208.10.30.00	3	Of a thickness of 4.75 mm or more	[“kg”]	Free		20%
7208.10.60.00	3	Of a thickness of less than 4.75 mm	[“kg”]	Free		20%
	1	Other, in coils, not further worked than hot-rolled, pickled:
7208.25	2	Of a thickness of 4.75 mm or more:
7208.25.30.00	3	Of high-strength steel	[“kg”]	Free		20%
7208.25.60.00	3	Other	[“kg”]	Free		0.4¢/kg + 20%
7208.26.00	2	Of a thickness of 3 mm or more but less than 4.75 mm		Free		0.4¢/kg + 20%
7208.26.00.30	3	High-strength steel	[“kg”]
7208.26.00.60	3	Other	[“kg”]
7208.27.00	2	Of a thickness of less than 3 mm		Free		0.4¢/kg + 20%
	3	High-strength steel:
7208.27.00.40	4	“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	[“kg”]
7208.27.00.45	4	Other	[“kg”]
7208.27.00.60	3	Other	[“kg”]
	1	Other, in coils, not further worked than hot-rolled:
7208.36.00	2	Of a thickness exceeding 10 mm		Free		20%
7208.36.00.30	3	High-strength steel	[“kg”]
7208.36.00.60	3	Other	[“kg”]
7208.37.00	2	Of a thickness of 4.75 mm or more but not exceeding 10 mm		Free		20%
7208.37.00.30	3	High-strength steel	[“kg”]
7208.37.00.60	3	Other	[“kg”]
7208.38.00	2	Of a thickness of 3 mm or more but less than 4.75 mm		Free		20%
7208.38.00.15	3	High-strength steel	[“kg”]
	3	Other:
7208.38.00.30	4	With untrimmed edges	[“kg”]
7208.38.00.90	4	Other	[“kg”]
7208.39.00	2	Of a thickness of less than 3 mm		Free		20%
	3	High-strength steel:
7208.39.00.20	4	“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	[“kg”]
7208.39.00.25	4	Other	[“kg”]
	3	Other:
7208.39.00.30	4	With untrimmed edges	[“kg”]
7208.39.00.90	4	Other	[“kg”]
7208.40	1	Not in coils, not further worked than hot-rolled, with patterns in relief:
7208.40.30	2	Of a thickness of 4.75 mm or more		Free		20%
7208.40.30.30	3	Of a thickness exceeding 10 mm	[“kg”]
7208.40.30.60	3	Other	[“kg”]
7208.40.60	2	Of a thickness of less than 4.75 mm		Free		20%
7208.40.60.30	3	Of a thickness less than 3 mm	[“kg”]
7208.40.60.60	3	Other	[“kg”]
	1	Other, not in coils, not further worked than hot-rolled:
7208.51.00	2	Of a thickness exceeding 10 mm		Free		20%
7208.51.00.30	3	Universal mill plate	[“kg”]
	3	Other:
7208.51.00.45	4	Of high-strength steel	[“kg”]
7208.51.00.60	4	Other	[“kg”]
7208.52.00.00	2	Of a thickness of 4.75 mm or more but not exceeding 10 mm	[“kg”]	Free		20%
7208.53.00.00	2	Of a thickness of 3 mm or more but less than 4.75 mm	[“kg”]	Free		20%
7208.54.00.00	2	Of a thickness of less than 3 mm	[“kg”]	Free		20%
7208.90.00.00	1	Other	[“kg”]	Free		20%
7209	0	Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:
	1	In coils, not further worked than cold-rolled (cold-reduced):
7209.15.00.00	2	Of a thickness of 3 mm or more	[“kg”]	Free		0.4¢/kg + 20%
7209.16.00	2	Of a thickness exceeding 1 mm but less than 3 mm		Free		0.4¢/kg + 20%
	3	Of high-strength steel:
	4	Annealed:
7209.16.00.40	5	“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	[“kg”]
7209.16.00.45	5	Other	[“kg”]
7209.16.00.60	4	Other	[“kg”]
	3	Other:
7209.16.00.70	4	Annealed	[“kg”]
7209.16.00.91	4	Other	[“kg”]
7209.17.00	2	Of a thickness of 0.5 mm or more but not exceeding 1 mm		Free		0.4¢/kg + 20%
	3	Of high-strength steel:
	4	Annealed:
7209.17.00.40	5	“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	[“kg”]
7209.17.00.45	5	Other	[“kg”]
7209.17.00.60	4	Other	[“kg”]
	3	Other:
7209.17.00.70	4	Annealed	[“kg”]
7209.17.00.91	4	Other	[“kg”]
7209.18	2	Of a thickness of less than 0.5 mm:
7209.18.15	3	Of high-strength steel		Free		0.4¢/kg + 20%
7209.18.15.30	4	Annealed	[“kg”]
7209.18.15.60	4	Other	[“kg”]
	3	Other:
7209.18.25	4	Of a thickness of less than 0.361 mm (blackplate)		Free		20%
7209.18.25.20	5	Annealed	[“kg”]
7209.18.25.85	5	Other	[“kg”]
7209.18.60	4	Other		Free		0.4¢/kg + 20%
7209.18.60.20	5	Annealed	[“kg”]
7209.18.60.90	5	Other	[“kg”]
	1	Not in coils, not further worked than cold-rolled (cold-reduced):
7209.25.00.00	2	Of a thickness of 3 mm or more	[“kg”]	Free		0.4¢/kg + 20%
7209.26.00.00	2	Of a thickness exceeding 1 mm but less than 3 mm	[“kg”]	Free		0.4¢/kg + 20%
7209.27.00.00	2	Of a thickness of 0.5 mm or more but not exceeding 1 mm	[“kg”]	Free		0.4¢/kg + 20%
7209.28.00.00	2	Of a thickness of less than 0.5 mm	[“kg”]	Free		0.4¢/kg + 20%
7209.90.00.00	1	Other	[“kg”]	Free		0.4¢/kg + 20%
7210	0	Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated:
	1	Plated or coated with tin:
7210.11.00.00	2	Of a thickness of 0.5 mm or more	[“kg”]	Free		6%
7210.12.00.00	2	Of a thickness of less than 0.5 mm	[“kg”]	Free		6%
7210.20.00.00	1	Plated or coated with lead, including terne-plate	[“kg”]	Free		6%
7210.30.00	1	Electrolytically plated or coated with zinc		Free		21.5%
7210.30.00.30	2	Of high-strength steel	[“kg”]
7210.30.00.60	2	Other	[“kg”]
	1	Otherwise plated or coated with zinc:
7210.41.00.00	2	Corrugated	[“kg”]	Free		21.5%
7210.49.00	2	Other		Free		21.5%
	3	Of high-strength steel:
7210.49.00.40	4	“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter	[“kg”]
7210.49.00.45	4	Other	[“kg”]
	3	Other:
7210.49.00.91	4	Of a thickness of 0.4 mm or more	[“kg”]
7210.49.00.95	4	Other	[“kg”]
7210.50.00	1	Plated or coated with chromium oxides or with chromium and chromium oxides		Free		45%
7210.50.00.20	3	Of a width less than 1050 mm	[“kg”]
7210.50.00.90	3	Other	[“kg”]
	1	Plated or coated with aluminum:
7210.61.00.00	2	Plated or coated with aluminum-zinc alloys	[“kg”]	Free		21.5%
7210.69.00.00	2	Other	[“kg”]	Free		21.5%
7210.70	1	Painted, varnished or coated with plastics:
7210.70.30.00	2	Not coated or plated with metal and not clad	[“kg”]	Free		0.4¢/kg + 20%
7210.70.60	2	Other		Free		21.5%
	3	Zinc coated or plated:
7210.70.60.30	4	Electrolytically coated or plated	[“kg”]
7210.70.60.60	4	Other	[“kg”]
7210.70.60.90	3	Other	[“kg”]
7210.90	1	Other:
7210.90.10.00	2	Clad	[“kg”]	Free		30%
	2	Other:
7210.90.60.00	3	Electrolytically coated or plated with base metal	[“kg”]	Free		45%
7210.90.90.00	3	Other	[“kg”]	Free		21.5%
7211	0	Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated:
	1	Not further worked than hot-rolled:
7211.13.00.00	2	Universal mill plate	[“kg”]	Free		20%
7211.14.00	2	Other, of a thickness of 4.75 mm or more		Free		20%
7211.14.00.30	3	Of high-strength steel	[“kg”]
	3	Other:
7211.14.00.45	4	Not in coils	[“kg”]
7211.14.00.90	4	Other	[“kg”]
7211.19	2	Other:
	3	Of a width of less than 300 mm:
7211.19.15.00	4	Of high-strength steel	[“kg”]	Free		25%
	4	Other:
7211.19.20.00	5	Of a thickness exceeding 1.25 mm	[“kg”]	Free		25%
7211.19.30.00	5	Other	[“kg”]	Free		25%
	3	Other:
7211.19.45.00	4	Of high-strength steel	[“kg”]	Free		20%
	4	Other:
7211.19.60.00	5	Pickled	[“kg”]	Free		0.4¢/kg + 20%
7211.19.75	5	Other		Free		20%
	6	In coils:
7211.19.75.30	7	With untrimmed edges	[“kg”]
7211.19.75.60	7	Other	[“kg”]
7211.19.75.90	6	Other	[“kg”]
	1	Not further worked than cold-rolled (cold-reduced):
7211.23	2	Containing by weight less than 0.25 percent of carbon:
	3	Of a width of less than 300 mm:
	4	Of a thickness exceeding 1.25 mm:
7211.23.15.00	5	Of high-strength steel	[“kg”]	Free		25%
7211.23.20.00	5	Other	[“kg”]	Free		25%
7211.23.30.00	4	Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm	[“kg”]	Free		25%
7211.23.45.00	4	Of a thickness not exceeding 0.25 mm	[“kg”]	Free		25%
7211.23.60	3	Other		Free		0.4¢/kg + 20%
7211.23.60.30	4	Of a thickness exceeding 1.25 mm	[“kg”]
7211.23.60.60	4	Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm	[“kg”]
7211.23.60.90	4	Of a thickness not exceeding 0.25 mm:	[“kg”]
7211.29	2	Other:
	3	Of a width of less than 300 mm:
7211.29.20	4	Of a thickness exceeding 0.25 mm		Free		25%
7211.29.20.30	5	Of a width less than 51 mm, in coils	[“kg”]
7211.29.20.90	5	Other	[“kg”]
7211.29.45.00	4	Other	[“kg”]	Free		25%
7211.29.60	3	Other		Free		0.4¢/kg + 20%
7211.29.60.30	4	Of a thickness exceeding 1.25 mm	[“kg”]
7211.29.60.80	4	Other	[“kg”]
7211.90.00.00	1	Other	[“kg”]	Free		20%
7212	0	Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated:
7212.10.00.00	1	Plated or coated with tin	[“kg”]	Free		6%
7212.20.00.00	1	Electrolytically plated or coated with zinc	[“kg”]	Free		21.5%
7212.30	1	Otherwise plated or coated with zinc:
	2	Of a width of less than 300 mm:
7212.30.10	3	Of a thickness exceeding 0.25 mm or more		Free		25%
7212.30.10.30	4	Of a width less than 51 mm, in coils	[“kg”]
7212.30.10.90	4	Other	[“kg”]
7212.30.30.00	3	Other	[“kg”]	Free		25%
7212.30.50.00	2	Other	[“kg”]	Free		21.5%
7212.40	1	Painted, varnished or coated with plastics:
7212.40.10.00	2	Of a width of less than 300 mm	[“kg”]	Free		25%
7212.40.50.00	2	Other	[“kg”]	Free		0.4¢/kg + 20%
7212.50.00.00	1	Otherwise plated or coated	[“kg”]	Free		21.5%
7212.60.00.00	1	Clad	[“kg”]	Free		30%
7213	0	Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:
7213.10.00.00	1	Concrete reinforcing bars and rods	[“kg”]	Free		20%
7213.20.00	1	Other, of free-cutting steel		Free		5.5%
7213.20.00.10	2	Containing by weight 0.1 percent or more of lead	[“kg”]
7213.20.00.80	2	Other	[“kg”]
	1	Other:
7213.91	2	Of circular cross section measuring less than 14 mm in diameter:
7213.91.30	3	Not tempered, not treated and not partly manufactured		Free		5.5%
7213.91.30.11	4	Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter	[“kg”]
7213.91.30.15	4	Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter	[“kg”]
7213.91.30.20	4	Of welding quality wire rods of a kind described in statistical note 7 to this chapter	[“kg”]
7213.91.30.93	4	Other	[“kg”]
	3	Other:
7213.91.45.00	4	Containing by weight 0.6 percent or more of carbon	[“kg”]	Free		5.5%
7213.91.60.00	4	Other	[“kg”]	Free		6%
7213.99.00	2	Other		Free		5.5%
	3	Of circular cross section:
7213.99.00.30	4	With a diameter of 14 mm or more but less than 19 mm	[“kg”]
7213.99.00.60	4	With a diameter of 19 mm or more	[“kg”]
7213.99.00.90	3	Other	[“kg”]
7214	0	Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
7214.10.00.00	1	Forged	[“kg”]	Free		20%
7214.20.00.00	1	Concrete reinforcing bars and rods	[“kg”]	Free		20%
7214.30.00	1	Other, of free-cutting steel		Free		20%
7214.30.00.10	2	Containing by weight 0.1 percent or more of lead	[“kg”]
7214.30.00.80	2	Other	[“kg”]
	1	Other:
7214.91.00	2	Of rectangular (other than square) cross-section		Free		20%
	3	Containing by weight less than 0.25 percent of carbon:
7214.91.00.16	4	With a maximum cross section less than 152 mm	[“kg”]
7214.91.00.20	4	With a maximum cross section of 152 mm or more	[“kg”]
7214.91.00.60	3	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	[“kg”]
7214.91.00.90	3	Containing by weight 0.6 percent or more of carbon	[“kg”]
7214.99.00	2	Other		Free		20%
	3	Rounds:
	4	Containing by weight less than 0.25 percent of carbon:
7214.99.00.16	5	With a diameter less than 76 mm	[“kg”]
7214.99.00.21	5	With a diameter of 76 mm or more but not exceeding 152 mm	[“kg”]
7214.99.00.26	5	With a diameter exceeding 152 mm	[“kg”]
	4	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
7214.99.00.31	5	With a diameter less than 76 mm	[“kg”]
7214.99.00.36	5	With a diameter of 76 mm or more but not exceeding 152 mm	[“kg”]
7214.99.00.40	5	With a diameter exceeding 152 mm	[“kg”]
7214.99.00.45	4	Containing by weight 0.6 percent or more of carbon	[“kg”]
	3	Other:
7214.99.00.60	4	Containing by weight less than 0.25 percent of carbon	[“kg”]
7214.99.00.75	4	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	[“kg”]
7214.99.00.90	4	Containing by weight 0.6 percent or more of carbon	[“kg”]
7215	0	Other bars and rods of iron or nonalloy steel:
7215.10.00	1	Of free-cutting steel, not further worked than cold-formed or cold-finished		Free		0.3¢/kg + 20%
7215.10.00.10	2	Containing by weight 0.1 percent or more of lead	[“kg”]
7215.10.00.80	2	Other	[“kg”]
7215.50.00	1	Other, not further worked than cold-formed or cold-finished		Free		0.3¢/kg + 20%
	2	Containing by weight less than 0.25 percent of carbon:
7215.50.00.16	3	With a diameter or cross section measuring less than 76 mm	[“kg”]
7215.50.00.18	3	With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm	[“kg”]
7215.50.00.20	3	With a diameter or cross section exceeding 228 mm	[“kg”]
	2	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
7215.50.00.61	3	With a diameter or cross section measuring less than 76 mm	[“kg”]
7215.50.00.63	3	With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm	[“kg”]
7215.50.00.65	3	With a diameter or cross section exceeding 228 mm	[“kg”]
7215.50.00.90	2	Containing by weight 0.6 percent or more of carbon	[“kg”]
7215.90	1	Other:
	2	Plated or coated with metal:
7215.90.10.00	3	Not cold-formed	[“kg”]	Free		0.4¢/kg + 20%
7215.90.30.00	3	Cold-formed	[“kg”]	Free		0.3¢/kg + 20%
7215.90.50.00	2	Other	[“kg”]	Free		0.3¢/kg + 20%
7216	0	Angles, shapes and sections of iron or nonalloy steel:
7216.10.00	1	U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm		Free		2%
7216.10.00.10	2	U sections	[“kg”]
7216.10.00.50	2	Other	[“kg”]
	1	L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:
7216.21.00.00	2	L sections	[“kg”]	Free		2%
7216.22.00.00	2	T sections	[“kg”]	Free		2%
	1	U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
7216.31.00.00	2	U sections	[“kg”]	Free		2%
7216.32.00.00	2	I sections (standard beams)	[“kg”]	Free		2%
7216.33.00	2	H sections		Free		2%
7216.33.00.30	3	Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm	[“kg”]
7216.33.00.60	3	Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm	[“kg”]
7216.33.00.90	3	Other	[“kg”]
7216.40.00	1	L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more		Free		2%
7216.40.00.10	2	L sections	[“kg”]
7216.40.00.50	2	Other	[“kg”]
7216.50.00.00	1	Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded	[“kg”]	Free		2%
	1	Angles, shapes and sections, not further worked than cold-formed or cold-finished:
7216.61.00.00	2	Obtained from flat-rolled products	[“kg”]	Free		20%
7216.69.00.00	2	Other	[“kg”]	Free		20%
	1	Other:
7216.91.00	2	Cold-formed or cold-finished from flat-rolled products		Free		20%
7216.91.00.10	3	Drilled, notched, punched or cambered	[“kg”]
7216.91.00.90	3	Other	[“kg”]
7216.99.00	2	Other		Free		20%
7216.99.00.10	3	Drilled, notched, punched or cambered	[“kg”]
7216.99.00.90	3	Other	[“kg”]
7217	0	Wire of iron or nonalloy steel:
7217.10	1	Not plated or coated, whether or not polished:
	2	Containing by weight less than 0.25 percent of carbon:
	3	Flat wire:
7217.10.10.00	4	Of a thickness not exceeding 0.25 mm	[“kg”]	Free		25%
7217.10.20.00	4	Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm	[“kg”]	Free		25%
7217.10.30.00	4	Of a thickness exceeding 1.25 mm	[“kg”]	Free		25%
	3	Round wire:
7217.10.40	4	With a diameter of less than 1.5 mm		Free		25%
	5	Heat treated:
7217.10.40.40	6	In coils weighing not more than 2 kilograms	[“kg”]
7217.10.40.45	6	Other	[“kg”]
7217.10.40.90	5	Other	[“kg”]
7217.10.50	4	With a diameter of 1.5 mm or more		Free		7%
7217.10.50.30	5	Heat treated	[“kg”]
7217.10.50.90	5	Other	[“kg”]
7217.10.60.00	3	Other wire	[“kg”]	Free		25%
	2	Other:
7217.10.70.00	3	Flat wire	[“kg”]	Free		25%
7217.10.80	3	Round wire		Free		25%
	4	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
7217.10.80.10	5	Heat treated	[“kg”]
7217.10.80.20	5	Other	[“kg”]
	4	Containing by weight 0.6 percent or more of carbon:
	5	Heat treated:
7217.10.80.25	6	With a diameter of less than 1.0 mm	[“kg”]
7217.10.80.30	6	With a diameter of 1.0 mm or more but less than 1.5 mm	[“kg”]
7217.10.80.45	6	With a diameter of 1.5 mm or more	[“kg”]
	5	Other:
7217.10.80.60	6	With a diameter of less than 1.0 mm	[“kg”]
7217.10.80.75	6	With a diameter of 1.0 mm or more but less than 1.5 mm	[“kg”]
7217.10.80.90	6	With a diameter of 1.5 mm or more	[“kg”]
7217.10.90.00	3	Other wire	[“kg”]	Free		25%
7217.20	1	Plated or coated with zinc:
7217.20.15.00	2	Flat wire	[“kg”]	Free		26%
	2	Round wire:
7217.20.30.00	3	With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon	[“kg”]	Free		7%
7217.20.45	3	Other		Free		25%
	4	With a diameter of less than 1.0 mm:
7217.20.45.10	5	Containing by weight less than 0.25 percent of carbon	[“kg”]
7217.20.45.20	5	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	[“kg”]
7217.20.45.30	5	Containing by weight 0.6 percent or more of carbon	[“kg”]
	4	With a diameter of 1.0 mm or more but less than 1.5 mm:
7217.20.45.40	5	Containing by weight less than 0.25 percent of carbon	[“kg”]
7217.20.45.50	5	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	[“kg”]
7217.20.45.60	5	Containing by weight 0.6 percent or more of carbon	[“kg”]
	4	With a diameter of 1.5 mm or more:
7217.20.45.70	5	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	[“kg”]
7217.20.45.80	5	Containing by weight 0.6 percent or more of carbon	[“kg”]
	2	Other:
7217.20.60.00	3	Containing by weight less than 0.25 percent of carbon	[“kg”]	Free		25%
7217.20.75.00	3	Other	[“kg”]	Free		26%
7217.30	1	Plated or coated with other base metals:
7217.30.15	2	Flat wire		Free		26%
7217.30.15.30	3	Containing by weight 0.6 percent or more of carbon	[“kg”]
7217.30.15.60	3	Other	[“kg”]
	2	Round wire:
7217.30.30.00	3	With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon	[“kg”]	Free		7%
7217.30.45	3	Other		Free		25%
7217.30.45.04	4	Containing by weight less than 0.20 percent of carbon, and suitable for electric arc welding	[“kg”]
	4	Other:
	5	With a diameter of less than 1.0 mm:
7217.30.45.11	6	Containing by weight less than 0.25 percent of carbon	[“kg”]
7217.30.45.20	6	Containing by weight 0.25 percent or more but less than 0.6 percent or carbon	[“kg”]
7217.30.45.30	6	Containing by weight 0.6 percent or more of carbon	[“kg”]
	5	With a diameter of 1.0 mm or more but less than 1.5 mm:
7217.30.45.41	6	Containing by weight less than 0.25 percent of carbon	[“kg”]
7217.30.45.50	6	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	[“kg”]
7217.30.45.60	6	Containing by weight 0.6 percent or more of carbon	[“kg”]
7217.30.45.90	5	With a diameter of 1.5 mm or more	[“kg”]
	2	Other:
7217.30.60.00	3	Containing by weight less than 0.25 percent of carbon	[“kg”]	Free		25%
7217.30.75.00	3	Other	[“kg”]	Free		26%
7217.90	1	Other:
7217.90.10.00	2	Coated with plastics	[“kg”]	Free		2%
7217.90.50	2	Other		Free		35%
7217.90.50.30	3	Containing by weight less than 0.25 percent of carbon	[“kg”]
7217.90.50.60	3	Containing by weight 0.25 percent or more but less than 0.6 percent of carbon	[“kg”]
7217.90.50.90	3	Containing by weight 0.6 percent or more of carbon	[“kg”]
	1	III. STAINLESS STEEL
7218	0	Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:
7218.10.00.00	1	Ingots and other primary forms	[“kg”]	Free		29%
	1	Other:
7218.91.00	2	Of rectangular (other than square) cross-section		Free		29%
	3	Having a width less than four times the thickness:
7218.91.00.15	4	Having a cross-sectional area of less than 232 cm2	[“kg”]
7218.91.00.30	4	Having a cross-sectional area of 232 cm2 or more	[“kg”]
7218.91.00.60	3	Having a width at least four times the thickness	[“kg”]
7218.99.00	2	Other		Free		29%
	3	Of square cross section:
7218.99.00.15	4	Having a cross-sectional area of less than 232 cm2	[“kg”]
7218.99.00.30	4	Having a cross-sectional area of 232 cm2 or more	[“kg”]
	3	Of circular cross section:
7218.99.00.45	4	Having a cross-sectional area of less than 232 cm2	[“kg”]
7218.99.00.60	4	Having a cross-sectional area of 232 cm2 or more	[“kg”]
7218.99.00.90	3	Other	[“kg”]
7219	0	Flat-rolled products of stainless steel, of a width of 600 mm or more:
	1	Not further worked than hot-rolled, in coils:
7219.11.00	2	Of a thickness exceeding 10 mm		Free		29%
7219.11.00.30	3	Of a width not exceeding 1575 mm	[“kg”]
7219.11.00.60	3	Of a width exceeding 1575 mm	[“kg”]
7219.12.00	2	Of a thickness of 4.75 mm or more but not exceeding 10 mm		Free		29%
7219.12.00.02	3	Not annealed or not pickled	[“kg”]
	3	Other:
7219.12.00.06	4	Of high-nickel alloy steel	[“kg”]
	4	Other:
	5	Of a width of 1370 mm or more:
	6	Of a thickness exceeding 6.8 mm:
7219.12.00.21	7	Of a width not exceeding 1575 mm	[“kg”]
7219.12.00.26	7	Of a width exceeding 1575 mm	[“kg”]
	6	Other:
7219.12.00.51	7	Of a width not exceeding 1575 mm	[“kg”]
7219.12.00.56	7	Of a width exceeding 1575 mm	[“kg”]
	5	Other:
	6	Containing more than 0.5 percent by weight of nickel:
7219.12.00.66	7	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7219.12.00.71	7	Other	[“kg”]
7219.12.00.81	6	Other	[“kg”]
7219.13.00	2	Of a thickness of 3 mm or more but less than 4.75 mm		Free		29%
7219.13.00.02	3	Not annealed or not pickled	[“kg”]
	3	Other:
7219.13.00.31	4	Of a width of 1370 mm or more	[“kg”]
	4	Other:
	5	Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7219.13.00.51	6	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7219.13.00.71	6	Other	[“kg”]
7219.13.00.81	5	Other	[“kg”]
7219.14.00	2	Of a thickness of less than 3 mm		Free		29%
7219.14.00.30	3	Of a width of 1370 mm or more	[“kg”]
	3	Other:
7219.14.00.65	4	Of high-nickel alloy steel	[“kg”]
7219.14.00.90	4	Other	[“kg”]
	1	Not further worked than hot-rolled, not in coils:
7219.21.00	2	Of a thickness exceeding 10 mm		Free		29%
7219.21.00.05	3	Of high-nickel alloy steel	[“kg”]
	3	Other:
7219.21.00.20	4	Of a width not exceeding 1575 mm	[“kg”]
7219.21.00.40	4	Of a width exceeding 1575 mm but not exceeding 1880 mm	[“kg”]
7219.21.00.60	4	Of a width exceeding 1880 mm	[“kg”]
7219.22.00	2	Of a thickness of 4.75 mm or more but not exceeding 10 mm		Free		29%
7219.22.00.05	3	Of high-nickel alloy steel	[“kg”]
	3	Other:
	4	Containing more than 0.5 percent by weight of nickel:
	5	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum:
7219.22.00.15	6	Of a width not exceeding 1575 mm	[“kg”]
7219.22.00.20	6	Of a width exceeding 1575 mm but not exceeding 1880 mm	[“kg”]
7219.22.00.25	6	Of a width exceeding 1880 mm	[“kg”]
	5	Other:
7219.22.00.35	6	Of a width not exceeding 1575 mm	[“kg”]
7219.22.00.40	6	Of a width exceeding 1575 mm but not exceeding 1880 mm	[“kg”]
7219.22.00.45	6	Of a width exceeding 1880 mm	[“kg”]
	4	Other:
7219.22.00.70	5	Of a width not exceeding 1575 mm	[“kg”]
7219.22.00.75	5	Of a width exceeding 1575 mm but not exceeding 1880 mm	[“kg”]
7219.22.00.80	5	Of a width exceeding 1880 mm	[“kg”]
7219.23.00	2	Of a thickness of 3 mm or more but less than 4.75 mm		Free		29%
7219.23.00.30	3	Of a width of 1370 mm or more	[“kg”]
7219.23.00.60	3	Other	[“kg”]
7219.24.00	2	Of a thickness of less than 3 mm		Free		29%
7219.24.00.30	3	Of a width of 1370 mm or more	[“kg”]
7219.24.00.60	3	Other	[“kg”]
	1	Not further worked than cold-rolled (cold-reduced):
7219.31.00	2	Of a thickness of 4.75 mm or more		Free		29%
7219.31.00.10	3	In coils	[“kg”]
7219.31.00.50	3	Not in coils	[“kg”]
7219.32.00	2	Of a thickness of 3 mm or more but less than 4.75 mm		Free		29%
	3	In coils:
	4	Of a width of 1370 mm or more:
7219.32.00.05	5	Of high-nickel alloy steel	[“kg”]
	5	Other:
7219.32.00.20	6	Containing more than 0.5 percent by weight of nickel	[“kg”]
7219.32.00.25	6	Other	[“kg”]
	4	Other:
7219.32.00.35	5	Of high-nickel alloy steel	[“kg”]
	5	Other:
	6	Containing more than 0.5 percent by weight of nickel:
7219.32.00.36	7	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7219.32.00.38	7	Other	[“kg”]
	6	Other:
7219.32.00.42	7	Containing less than 15 percent by weight of chromium	[“kg”]
7219.32.00.44	7	Other	[“kg”]
	3	Not in coils:
7219.32.00.45	4	Of a width of 1370 mm or more	[“kg”]
7219.32.00.60	4	Other	[“kg”]
7219.33.00	2	Of a thickness exceeding 1 mm but less than 3 mm		Free		29%
	3	In coils:
	4	Of a width of 1370 mm or more:
7219.33.00.05	5	Of high-nickel alloy steel	[“kg”]
	5	Other:
7219.33.00.20	6	Containing more than 0.5 percent by weight of nickel	[“kg”]
7219.33.00.25	6	Other	[“kg”]
	4	Other:
7219.33.00.35	5	Of high-nickel alloy steel	[“kg”]
	5	Other:
	6	Containing more than 0.5 percent by weight of nickel:
7219.33.00.36	7	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7219.33.00.38	7	Other	[“kg”]
	6	Other:
7219.33.00.42	7	Containing less than 15 percent by weight of chromium	[“kg”]
7219.33.00.44	7	Other	[“kg”]
	3	Not in coils:
7219.33.00.45	4	Of a width of 1370 mm or more	[“kg”]
	4	Other:
7219.33.00.70	5	Containing more than 0.5 percent but less than 24 percent by weight of nickel	[“kg”]
7219.33.00.80	5	Other	[“kg”]
7219.34.00	2	Of a thickness of 0.5 mm or more but not exceeding 1 mm		Free		29%
	3	In coils:
7219.34.00.05	4	Of high-nickel alloy steel	[“kg”]
	4	Other:
	5	Containing more than 0.5 percent by weight of nickel:
7219.34.00.20	6	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7219.34.00.25	6	Other	[“kg”]
	5	Other:
7219.34.00.30	6	Containing less than 15 percent by weight of chromium	[“kg”]
7219.34.00.35	6	Other	[“kg”]
7219.34.00.50	3	Not in coils	[“kg”]
7219.35.00	2	Of a thickness of less than 0.5 mm		Free		29%
	3	In coils:
	4	Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7219.35.00.05	5	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7219.35.00.15	5	Other	[“kg”]
	4	Other:
7219.35.00.30	5	Containing less than 15 percent by weight of chromium	[“kg”]
7219.35.00.35	5	Other	[“kg”]
7219.35.00.50	3	Not in coils	[“kg”]
7219.90.00	1	Other		Free		29%
7219.90.00.10	2	Of high-nickel alloy steel	[“kg”]
	2	Other:
	3	Containing more than 0.5 percent by weight of nickel:
7219.90.00.20	4	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7219.90.00.25	4	Other	[“kg”]
	3	Other:
7219.90.00.60	4	Containing less than 15 percent by weight of chromium	[“kg”]
7219.90.00.80	4	Other	[“kg”]
7220	0	Flat-rolled products of stainless steel, of a width of less than 600 mm:
	1	Not further worked than hot-rolled:
7220.11.00.00	2	Of a thickness of 4.75 mm or more	[“kg”]	Free		29%
7220.12	2	Of a thickness of less than 4.75 mm:
7220.12.10.00	3	Of a width of 300 mm or more	[“kg”]	Free		29%
7220.12.50.00	3	Of a width of less than 300 mm	[“kg”]	Free		34%
7220.20	1	Not further worked than cold-rolled (cold-reduced):
7220.20.10	2	Of a width of 300 mm or more		Free		29%
	3	Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7220.20.10.10	4	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7220.20.10.15	4	Other	[“kg”]
	3	Other:
7220.20.10.60	4	Containing less than 15 percent by weight of chromium	[“kg”]
7220.20.10.80	4	Other	[“kg”]
	2	Of a width of less than 300 mm:
7220.20.60	3	Of a thickness exceeding 1.25 mm		Free		34%
7220.20.60.05	4	Of high-nickel alloy steel	[“kg”]
	4	Other:
	5	Containing more than 0.5 percent by weight of nickel:
7220.20.60.10	6	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7220.20.60.15	6	Other	[“kg”]
	5	Other:
7220.20.60.60	6	Containing less than 15 percent by weight of chromium	[“kg”]
7220.20.60.80	6	Other	[“kg”]
7220.20.70	3	Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm		Free		34%
7220.20.70.05	4	Of high-nickel alloy steel	[“kg”]
	4	Other:
	5	Containing more than 0.5 percent by weight of nickel:
7220.20.70.10	6	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7220.20.70.15	6	Other	[“kg”]
	5	Other:
7220.20.70.60	6	Containing less than 15 percent by weight of chromium	[“kg”]
7220.20.70.80	6	Other	[“kg”]
	3	Of a thickness not exceeding 0.25 mm:
7220.20.80.00	4	Razor blade steel	[“kg”]	Free		34%
7220.20.90	4	Other		Free		34%
7220.20.90.30	5	Containing more than 0.5 percent but less than 24 percent by weight of nickel	[“kg”]
7220.20.90.60	5	Other	[“kg”]
7220.90.00	1	Other		Free		46%
	2	Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7220.90.00.10	3	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7220.90.00.15	3	Other	[“kg”]
	2	Other:
7220.90.00.60	3	Containing less than 15 percent by weight of chromium	[“kg”]
7220.90.00.80	3	Other	[“kg”]
7221.00.00	0	Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel		Free		11%
7221.00.00.05	1	Of high-nickel alloy steel	[“kg”]
	1	Other:
	2	Of circular cross section:
	3	With a diameter of less than 14 mm:
7221.00.00.17	4	Containing less than 8 percent by weight of nickel	[“kg”]
7221.00.00.18	4	Containing 8 percent or more but less than 24 percent by weight of nickel	[“kg”]
7221.00.00.30	3	With a diameter of 14 mm or more but less than 19 mm	[“kg”]
7221.00.00.45	3	With a diameter of 19 mm or more	[“kg”]
7221.00.00.75	2	Other	[“kg”]
7222	0	Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
	1	Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7222.11.00	2	Of circular cross-section		Free		29%
7222.11.00.01	3	Electroslag or vacuum arc remelted	[“kg”]
7222.11.00.06	3	Of high-nickel alloy steel	[“kg”]
	3	Other:
	4	With a maximum cross-sectional dimension of less than 152.4 mm:
7222.11.00.57	5	Containing less than 8 percent by weight of nickel	[“kg”]
7222.11.00.59	5	Containing 8 percent or more but less than 24 percent by weight of nickel	[“kg”]
	4	With a maximum cross-sectional dimension of 152.4 mm or more:
7222.11.00.82	5	Containing less than 8 percent by weight of nickel	[“kg”]
7222.11.00.84	5	Containing 8 percent or more but less than 24 percent by weight of nickel	[“kg”]
7222.19.00	2	Other		Free		29%
7222.19.00.01	3	Electroslag or vacuum arc remelted	[“kg”]
	3	Other:
7222.19.00.06	4	Of high-nickel alloy steel	[“kg”]
	4	Other:
7222.19.00.52	5	Containing less than 8 percent by weight of nickel	[“kg”]
7222.19.00.54	5	Containing 8 percent or more but less than 24 percent by weight of nickel	[“kg”]
7222.20.00	1	Bars and rods, not further worked than cold-formed or cold-finished		Free		29%
7222.20.00.01	2	Electroslag or vacuum arc remelted	[“kg”]
7222.20.00.06	2	Of high-nickel alloy steel	[“kg”]
	2	Other:
	3	Of a circular cross-section:
	4	With a maximum circular cross-sectional dimension of less than 18 mm:
7222.20.00.41	5	Containing less than 8 percent by weight of nickel	[“kg”]
7222.20.00.43	5	Containing 8 percent or more but less than 24 percent by weight of nickel	[“kg”]
	4	With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm:
7222.20.00.62	5	Containing less than 8 percent by weight of nickel	[“kg”]
7222.20.00.64	5	Containing 8 percent or more but less than 24 percent by weight of nickel	[“kg”]
	4	With a maximum circular cross-sectional dimension of 152.4 mm or more:
7222.20.00.67	5	Containing less than 8 percent by weight of nickel	[“kg”]
7222.20.00.69	5	Containing 8 percent or more but less than 24 percent by weight of nickel	[“kg”]
	3	Other:
7222.20.00.71	4	Containing less than 8 percent by weight of nickel	[“kg”]
7222.20.00.73	4	Containing 8 percent or more but less than 24 percent by weight of nickel	[“kg”]
7222.30.00	1	Other bars and rods		Free		29%
7222.30.00.01	2	Electroslag or vacuum arc remelted	[“kg”]
7222.30.00.12	2	Of high-nickel alloy steel	[“kg”]
	2	Other:
	3	With a maximum cross-sectional dimension of less than 152.4 mm:
7222.30.00.22	4	Containing less than 8 percent by weight of nickel	[“kg”]
7222.30.00.24	4	Containing 8 percent or more but less than 24 percent by weight of nickel	[“kg”]
	3	With a maximum cross-sectional dimension of 152.4 mm or more:
7222.30.00.82	4	Containing less than 8 percent by weight of nickel	[“kg”]
7222.30.00.84	4	Containing 8 percent or more but less than 24 percent by weight of nickel	[“kg”]
7222.40	1	Angles, shapes and sections:
7222.40.30	2	Hot-rolled, not drilled, not punched and not otherwise advanced		Free		10%
	3	With a maximum cross-sectional dimension of 80 mm or more:
7222.40.30.25	4	Angles	[“kg”]
7222.40.30.45	4	Other	[“kg”]
	3	With a maximum cross-sectional dimension of less than 80 mm:
7222.40.30.65	4	Angles	[“kg”]
7222.40.30.85	4	Other	[“kg”]
7222.40.60.00	2	Other	[“kg”]	Free		28%
7223.00	0	Wire of stainless steel:
7223.00.10	1	Round wire		Free		34%
7223.00.10.05	2	Spring round wire of a kind described in statistical note 8 to this chapter	[“kg”]
	2	Other:
7223.00.10.16	3	With a diameter of less than 0.25 mm	[“kg”]
7223.00.10.31	3	With a diameter of 0.25 mm or more but less than 0.76 mm	[“kg”]
7223.00.10.46	3	With a diameter of 0.76 mm or more but less than 1.52 mm	[“kg”]
7223.00.10.61	3	With a diameter of 1.52 mm or more but less than 5.1 mm	[“kg”]
7223.00.10.76	3	With a diameter of 5.1 mm or more	[“kg”]
7223.00.50.00	1	Flat wire	[“kg”]	Free		34%
7223.00.90.00	1	Other	[“kg”]	Free		34%
	1	IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NONALLOY STEEL
7224	0	Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:
7224.10.00	1	Ingots and other primary forms		Free		28%
7224.10.00.05	2	Of high-nickel alloy steel	[“kg”]
	2	Other:
7224.10.00.45	3	Of tool steel	[“kg”]
7224.10.00.75	3	Other	[“kg”]
7224.90.00	1	Other		Free		28%
7224.90.00.05	2	Of high-nickel alloy steel	[“kg”]
	2	Other:
	3	Of tool steel:
	4	Of rectangular (including square) cross section:
7224.90.00.15	5	Having a width less than four times the thickness	[“kg”]
7224.90.00.25	5	Having a width at least four times the thickness	[“kg”]
7224.90.00.35	4	Other	[“kg”]
	3	Other:
	4	Of rectangular (including square) cross section:
7224.90.00.45	5	Having a width less than four times the thickness	[“kg”]
7224.90.00.55	5	Having a width at least four times the thickness	[“kg”]
7224.90.00.65	4	Of circular cross section	[“kg”]
7224.90.00.75	4	Other	[“kg”]
7225	0	Flat-rolled products of other alloy steel, of a width of 600 mm or more:
	1	Of silicon electrical steel:
7225.11.00.00	2	Grain-oriented	[“kg”]	Free		28%
7225.19.00.00	2	Other	[“kg”]	Free		28%
7225.30	1	Other, not further worked than hot-rolled, in coils:
	2	Of a thickness of 4.75 mm or more:
7225.30.11	3	Of tool steel		Free		29%
7225.30.11.10	4	Of high-speed steel	[“kg”]
7225.30.11.80	4	Other	[“kg”]
7225.30.30	3	Other		Free		28%
7225.30.30.05	4	Of high-nickel alloy steel	[“kg”]
7225.30.30.50	4	Other	[“kg”]
	2	Of a thickness of less than 4.75 mm:
7225.30.51	3	Of tool steel		Free		29%
7225.30.51.10	4	Of high-speed steel	[“kg”]
7225.30.51.80	4	Other	[“kg”]
7225.30.70.00	3	Other	[“kg”]	Free		28%
7225.40	1	Other, not further worked than hot-rolled, not in coils:
	2	Of a thickness of 4.75 mm or more:
7225.40.11	3	Of tool steel		Free		29%
7225.40.11.10	4	Of high-speed steel	[“kg”]
7225.40.11.80	4	Other	[“kg”]
7225.40.30	3	Other		Free		28%
7225.40.30.05	4	Of high-nickel alloy steel	[“kg”]
7225.40.30.50	4	Other	[“kg”]
	2	Of a thickness of less than 4.75 mm:
7225.40.51	3	Of tool steel		Free		29%
7225.40.51.10	4	Of high-speed steel	[“kg”]
7225.40.51.30	4	Of ball-bearing steel	[“kg”]
7225.40.51.60	4	Other	[“kg”]
7225.40.70.00	3	Other	[“kg”]	Free		28%
7225.50	1	Other, not further worked than cold-rolled (cold-reduced):
7225.50.11	2	Of tool steel		Free		29%
7225.50.11.10	3	Of high-speed steel	[“kg”]
7225.50.11.30	3	Of ball-bearing steel	[“kg”]
7225.50.11.60	3	Other	[“kg”]
	2	Other:
7225.50.60.00	3	Of a thickness of 4.75 mm or more	[“kg”]	Free		28%
	3	Of a thickness of less than 4.75 mm:
7225.50.70.00	4	Heat-resisting steel	[“kg”]	Free		29%
7225.50.80	4	Other		Free		28%
7225.50.80.10	5	Of high-nickel alloy steel	[“kg”]
7225.50.80.80	5	Other	[“kg”]
	1	Other:
7225.91.00.00	2	Electrolytically plated or coated with zinc	[“kg”]	Free		28%
7225.92.00.00	2	Otherwise plated or coated with zinc	[“kg”]	Free		28%
7225.99.00	2	Other		Free		28%
7225.99.00.10	3	Of high-nickel alloy steel	[“kg”]
7225.99.00.90	3	Other	[“kg”]
7226	0	Flat-rolled products of other alloy steel, of a width of less than 600 mm:
	1	Of silicon electrical steel:
7226.11	2	Grain-oriented:
7226.11.10.00	3	Of a width of 300 mm or more	[“kg”]	Free		28%
7226.11.90	3	Of a width of less than 300 mm		Free		33%
7226.11.90.30	4	Of thickness not exceeding 0.25 mm	[“kg”]
7226.11.90.60	4	Other	[“kg”]
7226.19	2	Other:
7226.19.10.00	3	Of a width of 300 mm or more	[“kg”]	Free		28%
7226.19.90.00	3	Of a width of less than 300 mm	[“kg”]	Free		33%
7226.20.00.00	1	Of high-speed steel	[“kg”]	Free		37%
	1	Other:
7226.91	2	Not further worked than hot-rolled:
	3	Of tool steel (other than high-speed steel):
7226.91.05.00	4	Of chipper knife steel	[“kg”]	Free		34%
	4	Other:
7226.91.15	5	Of a width of 300 mm or more		Free		29%
7226.91.15.30	6	Of ball-bearing steel	[“kg”]
7226.91.15.60	6	Other	[“kg”]
7226.91.25	5	Of a width of less than 300 mm		Free		34%
7226.91.25.30	6	Of ball-bearing steel	[“kg”]
7226.91.25.60	6	Other	[“kg”]
	3	Other:
7226.91.50.00	4	Of a thickness of 4.75 mm or more	[“kg”]	Free		28%
	4	Of a thickness of less than 4.75 mm:
7226.91.70.00	5	Of a width of 300 mm or more	[“kg”]	Free		28%
7226.91.80.00	5	Of a width of less than 300 mm	[“kg”]	Free		33%
7226.92	2	Not further worked than cold-rolled (cold-reduced):
	3	Of tool steel (other than high-speed steel):
7226.92.10	4	Of a width of 300 mm or more		Free		0.4¢/kg + 29%
7226.92.10.30	5	Of ball-bearing steel	[“kg”]
7226.92.10.60	5	Other	[“kg”]
7226.92.30	4	Of a width of less than 300 mm		Free		34%
7226.92.30.30	5	Of ball-bearing steel	[“kg”]
7226.92.30.60	5	Other	[“kg”]
	3	Other:
7226.92.50.00	4	Of a width of 300 mm or more	[“kg”]	Free		0.4¢/kg + 28%
	4	Of a width of less than 300 mm:
7226.92.70	5	Of a thickness not exceeding 0.25 mm		Free		33%
7226.92.70.05	6	Of high-nickel alloy steel	[“kg”]
7226.92.70.50	6	Other	[“kg”]
7226.92.80	5	Of a thickness exceeding 0.25 mm		Free		33%
7226.92.80.05	6	Of high-nickel alloy steel	[“kg”]
7226.92.80.50	6	Other	[“kg”]
7226.99.01	2	Other		Free		33%
7226.99.01.10	3	Electrolytically plated or coated with zinc	[“kg”]
7226.99.01.30	3	Otherwise plated or coated with zinc	[“kg”]
7226.99.01.80	3	Other	[“kg”]
7227	0	Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
7227.10.00.00	1	Of high-speed steel	[“kg”]	Free		14%
7227.20.00	1	Of silico-manganese steel		Free		10%
7227.20.00.30	2	Of welding quality wire rods of a kind described in statistical note 7 to this chapter	[“kg”]
7227.20.00.80	2	Other	[“kg”]
7227.90	1	Other:
	2	Of tool steel (other than high-speed steel):
7227.90.10	3	Not tempered, not treated, and not partly manufactured		Free		12%
7227.90.10.30	4	Of ball-bearing steel	[“kg”]
7227.90.10.60	4	Other	[“kg”]
7227.90.20	3	Other		Free		11%
7227.90.20.30	4	Of ball-bearing steel	[“kg”]
7227.90.20.60	4	Other	[“kg”]
7227.90.60	2	Other		Free		10%
7227.90.60.05	3	Of high-nickel alloy steel	[“kg”]
7227.90.60.10	3	Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter	[“kg”]
7227.90.60.20	3	Of welding quality wire rods of a kind described in statistical note 7 to this chapter	[“kg”]
	3	Of a circular cross section:
7227.90.60.30	4	With a diameter of less than 14 mm	[“kg”]
7227.90.60.35	4	With a diameter of 14 mm or more but less than 19 mm	[“kg”]
7227.90.60.40	4	With a diameter of 19 mm or more	[“kg”]
7227.90.60.90	3	Other	[“kg”]
7228	0	Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
7228.10.00	1	Bars and rods, of high-speed steel		Free		32%
7228.10.00.10	2	Not cold-formed	[“kg”]
	2	Cold-formed:
7228.10.00.30	3	With a maximum cross-sectional dimension of less than 18 mm	[“kg”]
7228.10.00.60	3	With a maximum cross-sectional dimension of 18 mm or more	[“kg”]
7228.20	1	Bars and rods, of silico-manganese steel:
7228.20.10.00	2	Not cold-formed	[“kg”]	Free		28%
7228.20.50.00	2	Cold-formed	[“kg”]	Free		28%
	1	Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7228.30	2	Of tool steel (other than high-speed steel):
7228.30.20.00	3	Of ball-bearing steel	[“kg”]	Free		29%
7228.30.40.00	3	Of chipper knife steel, not cold-formed	[“kg”]	Free		28%
7228.30.60.00	3	Other	[“kg”]	Free		29%
7228.30.80	2	Other		Free		28%
7228.30.80.05	3	Of high-nickel alloy steel	[“kg”]
7228.30.80.10	3	Concrete reinforcing bars and rods	[“kg”]
	3	Other:
7228.30.80.15	4	With a diameter or cross section measuring less than 76 mm	[“kg”]
7228.30.80.41	4	With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm	[“kg”]
7228.30.80.45	4	With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm	[“kg”]
7228.30.80.70	4	With a diameter or cross section exceeding 228 mm	[“kg”]
7228.40.00.00	1	Other bars and rods, not further worked than forged	[“kg”]	Free		28%
7228.50	1	Other bars and rods, not further worked than cold-formed or cold-finished:
7228.50.10	2	Of tool steel (other than high-speed steel)		Free		29%
7228.50.10.10	3	Of ball-bearing steel	[“kg”]
	3	Other:
	4	With a maximum cross-sectional dimension of less than 18 mm:
7228.50.10.20	5	Of round or rectangular cross section with surfaces ground, milled or polished	[“kg”]
7228.50.10.40	5	Other	[“kg”]
	4	With a maximum cross-sectional dimension of 18 mm or more:
7228.50.10.60	5	Of round or rectangular cross section with surfaces ground, milled or polished	[“kg”]
7228.50.10.80	5	Other	[“kg”]
7228.50.50	2	Other		Free		28%
7228.50.50.05	3	Of high-nickel alloy steel	[“kg”]
	3	Other:
7228.50.50.15	4	With a diameter or cross section measuring less than 76 mm	[“kg”]
7228.50.50.40	4	With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm	[“kg”]
7228.50.50.70	4	With a diameter or cross section exceeding 228 mm	[“kg”]
7228.60	1	Other bars and rods:
7228.60.10	2	Of tool steel (other than high-speed steel)		Free		29%
7228.60.10.30	3	Of ball-bearing steel	[“kg”]
7228.60.10.60	3	Other	[“kg”]
	2	Other:
7228.60.60.00	3	Not cold-formed	[“kg”]	Free		28%
7228.60.80.00	3	Cold-formed	[“kg”]	Free		28%
7228.70	1	Angles, shapes and sections:
7228.70.30	2	Hot-rolled, not drilled, not punched and not otherwise advanced		Free		10%
7228.70.30.10	3	U, I, H and T sections	[“kg”]
	3	Other:
	4	With a maximum cross-sectional dimension of 76 mm or more:
7228.70.30.20	5	Angles	[“kg”]
7228.70.30.41	5	Other	[“kg”]
	4	With a maximum cross-sectional dimension of less than 76 mm:
7228.70.30.60	5	Angles	[“kg”]
7228.70.30.81	5	Other	[“kg”]
7228.70.60.00	2	Other	[“kg”]	Free		28%
7228.80.00.00	1	Hollow drill bars and rods	[“kg”]	Free		30%
7229	0	Wire of other alloy steel:
7229.20.00	1	Of silico-manganese steel		Free		33%
	2	Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding:
7229.20.00.10	3	Plated or coated with copper	[“kg”]
7229.20.00.15	3	Other	[“kg”]
7229.20.00.90	2	Other	[“kg”]
7229.90	1	Other:
7229.90.05.00	2	Of high-speed steel	[“kg”]	Free		37%
	2	Other:
7229.90.10.00	3	Flat wire	[“kg”]	Free		33%
7229.90.50	3	Round wire		Free		33%
	4	With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding:
7229.90.50.06	5	Plated or coated with copper	[“kg”]
7229.90.50.08	5	Other	[“kg”]
	4	Other:
7229.90.50.16	5	With a diameter of less than 1.0 mm	[“kg”]
7229.90.50.31	5	With a diameter of 1.0 mm or more but less than 1.5 mm	[“kg”]
7229.90.50.51	5	With a diameter of 1.5 mm or more	[“kg”]
7229.90.90.00	3	Other wire	[“kg”]	Free		33%

Chapter 73: Articles of iron or steel

HTS Number	Indent	Description	Unit of Quantity	General Rate of Duty	Special Rate of Duty	Column 2 Rate of Duty	Quota Quantity	Additional Duties
7301	0	Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel:
7301.10.00.00	1	Sheet piling	[“kg”]	Free		2%
7301.20	1	Angles, shapes and sections:
7301.20.10.00	2	Of iron or nonalloy steel	[“kg”]	Free		20%
7301.20.50.00	2	Of alloy steel	[“kg”]	Free		28%
7302	0	Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails:
7302.10	1	Rails:
7302.10.10	2	Of iron or nonalloy steel		Free		1%
	3	New:
	4	Not heat treated:
7302.10.10.10	5	Standard tee rails over 30 kg per meter	[“kg”]
	5	Other:
7302.10.10.15	6	Over 30 kg per meter	[“kg”]
7302.10.10.25	6	Other	[“kg”]
	4	Heat treated:
7302.10.10.35	5	Standard tee rails over 30 kg per meter	[“kg”]
	5	Other:
7302.10.10.45	6	Over 30 kg per meter	[“kg”]
7302.10.10.55	6	Other	[“kg”]
	3	Used:
7302.10.10.65	4	Railway rails for rerolling	[“kg”]
7302.10.10.75	4	Other	[“kg”]
7302.10.50	2	Of alloy steel		Free		9%
7302.10.50.20	3	New	[“kg”]
	3	Used:
7302.10.50.40	4	Railway rails for rerolling	[“kg”]
7302.10.50.60	4	Other	[“kg”]
7302.30.00.00	1	Switch blades, crossing frogs, point rods and other crossing pieces	[“kg”]	Free		45%
7302.40.00.00	1	Fish-plates and sole plates	[“kg”]	Free		2%
7302.90	1	Other:
7302.90.10.00	2	Sleepers (cross-ties)	[“kg”]	Free		2%
7302.90.90.00	2	Other	[“kg”]	Free		45%
7303.00.00	0	Tubes, pipes and hollow profiles, of cast iron		Free		33%
7303.00.00.30	1	Soil pipe	[“kg”]
7303.00.00.60	1	Pressure pipe with an inside diameter of less than 356 mm	[“kg”]
7303.00.00.90	1	Other	[“kg”]
7304	0	Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel:
	1	Line pipe of a kind used for oil or gas pipelines:
7304.11.00	2	Of stainless steel		Free		35%
7304.11.00.20	3	Having an outside diameter not exceeding 114.3 mm	[“kg”]
7304.11.00.50	3	Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	[“kg”]
7304.11.00.80	3	Having an outside diameter exceeding 406.4 mm	[“kg”]
7304.19	2	Other:
7304.19.10	3	Of iron or nonalloy steel		Free		25%
7304.19.10.20	4	Having an outside diameter not exceeding 114.3 mm	[“kg”]
7304.19.10.30	4	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	[“kg”]
	4	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm:
7304.19.10.45	5	Having a wall thickness less than 12.7 mm	[“kg”]
7304.19.10.60	5	Having a wall thickness of 12.7 mm or more	[“kg”]
7304.19.10.80	4	Having an outside diameter exceeding 406.4 mm	[“kg”]
7304.19.50	3	Of other alloy steel		Free		35%
7304.19.50.20	4	Having an outside diameter not exceeding 114.3 mm	[“kg”]
7304.19.50.50	4	Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	[“kg”]
7304.19.50.80	4	Having an outside diameter exceeding 406.4 mm	[“kg”]
	1	Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:
7304.22.00	2	Drill pipe of stainless steel		Free		35%
	3	Having an outside diameter not exceeding 168.3 mm:
7304.22.00.30	4	Having a wall thickness not exceeding 9.5 mm	[“kg”]
7304.22.00.45	4	Having a wall thickness exceeding 9.5 mm	[“kg”]
7304.22.00.60	3	Having an outside diameter exceeding 168.3 mm	[“kg”]
7304.23	2	Other drill pipe:
7304.23.30.00	3	Of iron or nonalloy steel	[“kg”]	Free		25%
7304.23.60	3	Of alloy steel		Free		35%
	4	Having an outside diameter not exceeding 168.3 mm:
7304.23.60.30	5	Having a wall thickness not exceeding 9.5 mm	[“kg”]
7304.23.60.45	5	Having a wall thickness exceeding 9.5 mm	[“kg”]
7304.23.60.60	4	Having an outside diameter exceeding 168.3 mm	[“kg”]
7304.24	2	Other, of stainless steel:
	3	Casing:
7304.24.30	4	Threaded or coupled		Free		28%
	5	Having an outside diameter less than 215.9 mm:
7304.24.30.10	6	Having a wall thickness less than 12.7 mm	[“kg”]
7304.24.30.20	6	Having a wall thickness of 12.7 mm or more	[“kg”]
	5	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.24.30.30	6	Having a wall thickness less than 12.7 mm	[“kg”]
7304.24.30.40	6	Having a wall thickness of 12.7 mm or more	[“kg”]
7304.24.30.45	5	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm	[“kg”]
7304.24.30.80	5	Having an outside diameter exceeding 406.4 mm	[“kg”]
7304.24.40	4	Other		Free		8.5%
	5	Having an outside diameter less than 215.9 mm:
7304.24.40.10	6	Having a wall thickness less than 12.7 mm	[“kg”]
7304.24.40.20	6	Having a wall thickness of 12.7 mm or more	[“kg”]
	5	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.24.40.30	6	Having a wall thickness less than 12.7 mm	[“kg”]
7304.24.40.40	6	Having a wall thickness of 12.7 mm or more	[“kg”]
	5	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.24.40.50	6	Having a wall thickness less than 12.7 mm	[“kg”]
7304.24.40.60	6	Having a wall thickness of 12.7 mm or more	[“kg”]
7304.24.40.80	5	Having an outside diameter exceeding 406.4 mm	[“kg”]
7304.24.60	3	Tubing		Free		35%
	4	Having an outside diameter not exceeding 114.3 mm:
7304.24.60.15	5	Having a wall thickness not exceeding 9.5 mm	[“kg”]
7304.24.60.30	5	Having a wall thickness exceeding 9.5 mm	[“kg”]
7304.24.60.45	4	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	[“kg”]
7304.24.60.60	4	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	[“kg”]
7304.24.60.75	4	Having an outside diameter exceeding 406.4 mm	[“kg”]
7304.29	2	Other:
	3	Casing:
	4	Of iron or nonalloy steel:
7304.29.10	5	Threaded or coupled		Free		20%
	6	Having an outside diameter less than 215.9 mm:
7304.29.10.10	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.10.20	7	Having a wall thickness of 12.7 mm or more	[“kg”]
	6	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.10.30	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.10.40	7	Having a wall thickness of 12.7 mm or more	[“kg”]
	6	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.10.50	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.10.60	7	Having a wall thickness of 12.7 mm or more	[“kg”]
7304.29.10.80	6	Having an outside diameter exceeding 406.4 mm	[“kg”]
7304.29.20	5	Other		Free		1%
	6	Having an outside diameter less than 215.9 mm:
7304.29.20.10	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.20.20	7	Having a wall thickness of 12.7 mm or more	[“kg”]
	6	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.20.30	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.20.40	7	Having a wall thickness of 12.7 mm or more	[“kg”]
	6	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.20.50	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.20.60	7	Having a wall thickness of 12.7 mm or more	[“kg”]
7304.29.20.80	6	Having an outside diameter exceeding 406.4 mm	[“kg”]
	4	Of other alloy steel:
7304.29.31	5	Threaded or coupled		Free		28%
	6	Having an outside diameter less than 215.9 mm:
7304.29.31.10	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.31.20	7	Having a wall thickness of 12.7 mm or more	[“kg”]
	6	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.31.30	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.31.40	7	Having a wall thickness of 12.7 mm or more	[“kg”]
	6	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.31.50	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.31.60	7	Having a wall thickness of 12.7 mm or more	[“kg”]
7304.29.31.80	6	Having an outside diameter exceeding 406.4 mm	[“kg”]
7304.29.41	5	Other		Free		8.5%
	6	Having an outside diameter less than 215.9 mm:
7304.29.41.10	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.41.20	7	Having a wall thickness of 12.7 mm or more	[“kg”]
	6	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.41.30	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.41.40	7	Having a wall thickness of 12.7 mm or more	[“kg”]
	6	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.41.50	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.29.41.60	7	Having a wall thickness of 12.7 mm or more	[“kg”]
7304.29.41.80	6	Having an outside diameter exceeding 406.4 mm	[“kg”]
	3	Tubing:
7304.29.50	4	Of iron or nonalloy steel		Free		25%
	5	Having an outside diameter not exceeding 114.3 mm:
7304.29.50.15	6	Having a wall thickness not exceeding 9.5 mm	[“kg”]
7304.29.50.30	6	Having a wall thickness exceeding 9.5 mm	[“kg”]
7304.29.50.45	5	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	[“kg”]
7304.29.50.60	5	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	[“kg”]
7304.29.50.75	5	Having an outside diameter exceeding 406.4 mm	[“kg”]
7304.29.61	4	Of other alloy steel		Free		35%
	5	Having an outside diameter not exceeding 114.3 mm:
7304.29.61.15	6	Having a wall thickness not exceeding 9.5 mm	[“kg”]
7304.29.61.30	6	Having a wall thickness exceeding 9.5 mm	[“kg”]
7304.29.61.45	5	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	[“kg”]
7304.29.61.60	5	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	[“kg”]
7304.29.61.75	5	Having an outside diameter exceeding 406.4 mm	[“kg”]
	1	Other, of circular cross section, of iron or nonalloy steel:
7304.31	2	Cold-drawn or cold-rolled (cold-reduced):
7304.31.30.00	3	Hollow bars	[“kg”]	Free		22%
7304.31.60	3	Other		Free		25%
7304.31.60.10	4	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	[“kg”]
7304.31.60.50	4	Other	[“kg”]
7304.39.00	2	Other		Free		25%
	3	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters:
7304.39.00.02	4	Having an outside diameter less than 38.1 mm	[“kg”]
7304.39.00.04	4	Having an outside diameter of 38.1 mm or more but less than 190.5 mm	[“kg”]
7304.39.00.06	4	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm	[“kg”]
7304.39.00.08	4	Having an outside diameter exceeding 285.8 mm	[“kg”]
	3	Other:
7304.39.00.16	4	Galvanized, having an outside diameter not exceeding 114.3 mm	[“kg”]
	4	Other:
7304.39.00.20	5	Having an outside diameter less than 38.1 mm	[“kg”]
	5	Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm:
7304.39.00.24	6	Having a wall thickness less than 6.4 mm	[“kg”]
7304.39.00.28	6	Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm	[“kg”]
7304.39.00.32	6	Having a wall thickness exceeding 12.7 mm	[“kg”]
	5	Having an outside diameter exceeding 114.3 mm but less than 190.5 mm:
7304.39.00.36	6	Having a wall thickness less than 12.7 mm	[“kg”]
7304.39.00.40	6	Having a wall thickness of 12.7 mm or more but less than 19 mm	[“kg”]
7304.39.00.44	6	Having a wall thickness of 19 mm or more	[“kg”]
	5	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm:
7304.39.00.48	6	Having a wall thickness less than 12.7 mm	[“kg”]
7304.39.00.52	6	Having a wall thickness of 12.7 mm or more but less than 19 mm	[“kg”]
7304.39.00.56	6	Having a wall thickness of 19 mm or more	[“kg”]
	5	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.39.00.62	6	Having a wall thickness less than 12.7 mm	[“kg”]
7304.39.00.68	6	Having a wall thickness of 12.7 mm or more but less than 19 mm	[“kg”]
7304.39.00.72	6	Having a wall thickness of 19 mm or more	[“kg”]
	5	Having an outside diameter exceeding 406.4 mm:
7304.39.00.76	6	Having a wall thickness less than 19 mm	[“kg”]
7304.39.00.80	6	Having a wall thickness of 19 mm or more	[“kg”]
	1	Other, of circular cross section, of stainless steel:
7304.41	2	Cold-drawn or cold-rolled (cold-reduced):
7304.41.30	3	Of an external diameter of less than 19 mm		Free		36%
7304.41.30.05	4	Of high-nickel alloy steel	[“kg”]
	4	Other:
7304.41.30.15	5	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	[“kg”]
7304.41.30.45	5	Other	[“kg”]
7304.41.60	3	Other		Free		36%
7304.41.60.05	4	Of high-nickel alloy steel	[“kg”]
	4	Other:
7304.41.60.15	5	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	[“kg”]
7304.41.60.45	5	Other	[“kg”]
7304.49.00	2	Other		Free		36%
7304.49.00.05	3	Of high-nickel alloy steel	[“kg”]
	3	Other:
7304.49.00.15	4	Hollow bars	[“kg”]
	4	Other:
7304.49.00.45	5	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	[“kg”]
7304.49.00.60	5	Other	[“kg”]
	1	Other, of circular cross section, of other alloy steel:
7304.51	2	Cold-drawn or cold-rolled (cold-reduced):
7304.51.10.00	3	Suitable for use in the manufacture of ball or roller bearings	[“kg”]	Free		34%
7304.51.50	3	Other		Free		35%
7304.51.50.05	4	Of high-nickel alloy steel	[“kg”]
	4	Other:
	5	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters:
7304.51.50.15	6	Of heat-resisting steel	[“kg”]
7304.51.50.45	6	Other	[“kg”]
7304.51.50.60	5	Other	[“kg”]
7304.59	2	Other:
7304.59.10.00	3	Suitable for use in the manufacture of ball or roller bearings	[“kg”]	Free		34%
	3	Other:
7304.59.20	4	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters		Free		35%
7304.59.20.30	5	Of heat-resisting steel	[“kg”]
	5	Other:
7304.59.20.40	6	Having an outside diameter less than 38.1 mm	[“kg”]
7304.59.20.45	6	Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm	[“kg”]
7304.59.20.55	6	Having an outside diameter exceeding 114.3 mm but less than 190.5 mm	[“kg”]
7304.59.20.60	6	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm	[“kg”]
7304.59.20.70	6	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm	[“kg”]
7304.59.20.80	6	Having an outside diameter exceeding 406.4 mm	[“kg”]
	4	Other:
7304.59.60.00	5	Of heat-resisting steel	[“kg”]	Free		36%
7304.59.80	5	Other		Free		35%
7304.59.80.10	6	Having an outside diameter less than 38.1 mm	[“kg”]
	6	Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm:
7304.59.80.15	7	Having a wall thickness less than 6.4 mm	[“kg”]
7304.59.80.20	7	Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm	[“kg”]
7304.59.80.25	7	Having a wall thickness exceeding 12.7 mm	[“kg”]
	6	Having an outside diameter exceeding 114.3 mm but less than 190.5 mm:
7304.59.80.30	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.59.80.35	7	Having a wall thickness of 12.7 mm or more but less than 19 mm	[“kg”]
7304.59.80.40	7	Having a wall thickness of 19 mm or more	[“kg”]
	6	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm:
7304.59.80.45	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.59.80.50	7	Having a wall thickness of 12.7 mm or more but less than 19 mm	[“kg”]
7304.59.80.55	7	Having a wall thickness of 19 mm or more	[“kg”]
	6	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.59.80.60	7	Having a wall thickness less than 12.7 mm	[“kg”]
7304.59.80.65	7	Having a wall thickness of 12.7 mm or more but less than 19 mm	[“kg”]
7304.59.80.70	7	Having a wall thickness of 19 mm or more	[“kg”]
7304.59.80.80	6	Having an outside diameter exceeding 406.4 mm	[“kg”]
7304.90	1	Other:
	2	Having a wall thickness of 4 mm or more:
7304.90.10.00	3	Of iron or nonalloy steel	[“kg”]	Free		1%
7304.90.30.00	3	Of alloy steel	[“kg”]	Free		8.5%
	2	Having a wall thickness of less than 4 mm:
7304.90.50.00	3	Of iron or nonalloy steel	[“kg”]	Free		25%
7304.90.70.00	3	Of alloy steel	[“kg”]	Free		35%
7305	0	Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel:
	1	Line pipe of a kind used for oil or gas pipelines:
7305.11	2	Longitudinally submerged arc welded:
7305.11.10	3	Of iron or nonalloy steel		Free		5.5%
7305.11.10.30	4	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	[“kg”]
7305.11.10.60	4	With an external diameter exceeding 609.6 mm	[“kg”]
7305.11.50.00	3	Of alloy steel	[“kg”]	Free		10%
7305.12	2	Other, longitudinally welded:
7305.12.10	3	Of iron or nonalloy steel		Free		5.5%
7305.12.10.30	4	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	[“kg”]
7305.12.10.60	4	With an external diameter exceeding 609.6 mm	[“kg”]
7305.12.50.00	3	Of alloy steel	[“kg”]	Free		10%
7305.19	2	Other:
7305.19.10	3	Of iron or nonalloy steel		Free		5.5%
7305.19.10.30	4	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	[“kg”]
7305.19.10.60	4	With an external diameter exceeding 609.6 mm	[“kg”]
7305.19.50.00	3	Of alloy steel	[“kg”]	Free		10%
7305.20	1	Casing of a kind used in drilling for oil or gas:
	2	Of iron or nonalloy steel:
7305.20.20.00	3	Threaded or coupled	[“kg”]	Free		20%
7305.20.40.00	3	Other	[“kg”]	Free		1%
	2	Of alloy steel:
7305.20.60.00	3	Threaded or coupled	[“kg”]	Free		28%
7305.20.80.00	3	Other	[“kg”]	Free		8.5%
	1	Other, welded:
7305.31	2	Longitudinally welded:
7305.31.20.00	3	Tapered pipes and tubes of steel principally used as parts of illuminating articles	[“kg”]	Free		45%
	3	Other:
7305.31.40.00	4	Of iron or nonalloy steel	[“kg”]	Free		5.5%
7305.31.60	4	Of alloy steel		Free		10%
7305.31.60.10	5	Of stainless steel	[“kg”]
7305.31.60.90	5	Other	[“kg”]
7305.39	2	Other:
7305.39.10.00	3	Of iron or nonalloy steel	[“kg”]	Free		5.5%
7305.39.50.00	3	Of alloy steel	[“kg”]	Free		10%
7305.90	1	Other:
7305.90.10.00	2	Of iron or nonalloy steel	[“kg”]	Free		5.5%
7305.90.50.00	2	Of alloy steel	[“kg”]	Free		10%
7306	0	Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel:
	1	Line pipe of a kind used for oil or gas pipelines:
7306.11.00	2	Welded, of stainless steel		Free		10%
7306.11.00.10	3	With an outside diameter not exceeding 114.3 mm	[“kg”]
7306.11.00.50	3	With an outside diameter exceeding 114.3 mm	[“kg”]
7306.19	2	Other:
7306.19.10	3	Of iron or nonalloy steel		Free		5.5%
7306.19.10.10	4	With an outside diameter not exceeding 114.3 mm	[“kg”]
7306.19.10.50	4	With an outside diameter exceeding 114.3 mm	[“kg”]
7306.19.51	3	Of alloy steel		Free		10%
7306.19.51.10	4	With an outside diameter not exceeding 114.3 mm	[“kg”]
7306.19.51.50	4	With an outside diameter exceeding 114.3 mm	[“kg”]
	1	Casing and tubing of a kind used in drilling for oil or gas:
7306.21	2	Welded of stainless steel:
	3	Casing:
7306.21.30.00	4	Threaded or coupled	[“kg”]	Free		28%
7306.21.40.00	4	Other	[“kg”]	Free		8.5%
7306.21.80	3	Tubing		Free		10%
7306.21.80.10	4	Imported with coupling	[“kg”]
7306.21.80.50	4	Other	[“kg”]
7306.29	2	Other:
	3	Casing:
	4	Of iron or nonalloy steel:
7306.29.10	5	Threaded or coupled		Free		20%
7306.29.10.30	6	Imported with coupling	[“kg”]
7306.29.10.90	6	Other	[“kg”]
7306.29.20.00	5	Other	[“kg”]	Free		1%
	4	Other:
7306.29.31.00	5	Threaded or coupled	[“kg”]	Free		28%
7306.29.41.00	5	Other	[“kg”]	Free		8.5%
	3	Tubing:
7306.29.60	4	Of iron or nonalloy steel		Free		5.5%
7306.29.60.10	5	Imported with coupling	[“kg”]
7306.29.60.50	5	Other	[“kg”]
7306.29.81	4	Other		Free		10%
7306.29.81.10	5	Imported with coupling	[“kg”]
7306.29.81.50	5	Other	[“kg”]
7306.30	1	Other, welded, of circular cross section, of iron or nonalloy steel:
7306.30.10.00	2	Having a wall thickness of less than 1.65 mm	[“kg”]	Free		25%
	2	Having a wall thickness of 1.65 mm or more:
7306.30.30.00	3	Tapered steel pipes and tubes principally used as parts of illuminating articles	[“kg”]	Free		45%
7306.30.50	3	Other		Free		5.5%
7306.30.50.10	4	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn	[“kg”]
7306.30.50.15	4	Other, cold-drawn	[“kg”]
7306.30.50.20	4	Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm	[“kg”]
	4	Other:
	5	With an outside diameter not exceeding 114.3 mm:
	6	Galvanized:
	7	Imported with coupling:
7306.30.50.26	8	With an outside diameter not exceeding 50.8 mm	[“kg”]
7306.30.50.27	8	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	[“kg”]
7306.30.50.28	7	Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit	[“kg”]
	7	Other:
7306.30.50.31	8	With an outside diameter not exceeding 50.8 mm	[“kg”]
7306.30.50.33	8	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	[“kg”]
	6	Other:
7306.30.50.35	7	Tube and pipe hollows for redrawing	[“kg”]
	7	Imported with coupling:
7306.30.50.41	8	With an outside diameter not exceeding 50.8 mm	[“kg”]
7306.30.50.43	8	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	[“kg”]
	7	Other:
7306.30.50.56	8	With an outside diameter not exceeding 50.8 mm	[“kg”]
7306.30.50.57	8	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	[“kg”]
	5	With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm:
7306.30.50.85	6	Galvanized	[“kg”]
7306.30.50.90	6	Other	[“kg”]
7306.40	1	Other, welded, of circular cross section, of stainless steel:
7306.40.10	2	Having a wall thickness of less than 1.65 mm		Free		36%
	3	Containing more than 0.5 percent by weight of nickel:
7306.40.10.10	4	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7306.40.10.15	4	Other	[“kg”]
7306.40.10.90	3	Other	[“kg”]
7306.40.50	2	Having a wall thickness of 1.65 mm or more		Free		11%
7306.40.50.05	3	Of high-nickel alloy steel	[“kg”]
	3	Other:
7306.40.50.15	4	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn	[“kg”]
	4	Other, cold-drawn or cold-rolled (cold- reduced):
7306.40.50.40	5	Containing more than 0.5 percent but less than 24 percent by weight of nickel	[“kg”]
	5	Other:
7306.40.50.42	6	Containing less than 15 percent by weight of chromium	[“kg”]
7306.40.50.44	6	Other	[“kg”]
	4	Other:
	5	With an outside diameter not exceeding 114.3 mm:
	6	Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7306.40.50.62	7	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	[“kg”]
7306.40.50.64	7	Other	[“kg”]
7306.40.50.80	6	Other	[“kg”]
	5	With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm:
7306.40.50.85	6	Containing more than 0.5 percent but less than 24 percent by weight of nickel	[“kg”]
7306.40.50.90	6	Other	[“kg”]
7306.50	1	Other, welded, of circular cross section, of other alloy steel:
7306.50.10.00	2	Having a wall thickness of less than 1.65 mm	[“kg”]	Free		35%
	2	Having a wall thickness of 1.65 mm or more:
7306.50.30.00	3	Tapered pipes and tubes of steel principally used as parts of illuminating articles	[“kg”]	Free		45%
7306.50.50	3	Other		Free		10%
7306.50.50.10	4	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn	[“kg”]
7306.50.50.30	4	Other, cold-drawn or cold-rolled (cold- reduced)	[“kg”]
	4	Other:
7306.50.50.50	5	With an outside diameter not exceeding 114.3 mm	[“kg”]
7306.50.50.70	5	With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	[“kg”]
	1	Other, welded, of noncircular cross section:
7306.61	2	Of square or rectangular cross section:
	3	Having a wall thickness of 4 mm or more:
7306.61.10.00	4	Of iron or nonalloy steel	[“kg”]	Free		1%
7306.61.30.00	4	Of alloy steel	[“kg”]	Free		28%
	3	Having a wall thickness of less than 4 mm:
7306.61.50.00	4	Of iron or nonalloy steel	[“kg”]	Free		25%
7306.61.70	4	Of alloy steel		Free		35%
7306.61.70.30	5	Of stainless steel	[“kg”]
7306.61.70.60	5	Other	[“kg”]
7306.69	2	Of other noncircular cross section:
	3	Having a wall thickness of 4 mm or more:
7306.69.10.00	4	Of iron or nonalloy steel	[“kg”]	Free		1%
7306.69.30.00	4	Of alloy steel	[“kg”]	Free		28%
	3	Having a wall thickness of less than 4 mm:
7306.69.50.00	4	Of iron or nonalloy steel	[“kg”]	Free		25%
7306.69.70	4	Of alloy steel		Free		35%
7306.69.70.30	5	Of stainless steel	[“kg”]
7306.69.70.60	5	Other	[“kg”]
7306.90	1	Other:
7306.90.10.00	2	Of iron or nonalloy steel	[“kg”]	Free		5.5%
7306.90.50.00	2	Of alloy steel	[“kg”]	Free		10%
7307	0	Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel:
	1	Cast fittings:
7307.11.00	2	Of nonmalleable cast iron		4.8%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7307.11.00.30	3	For threaded pipe	[“kg”]
	3	Other:
7307.11.00.45	4	For cast-iron soil pipe	[“kg”]
7307.11.00.60	4	Other	[“kg”]
7307.19	2	Other:
7307.19.30	3	Ductile fittings		5.6%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7307.19.30.40	4	Grooved-end fittings (including grooved couplings)	[“kg”]
	4	Other:
7307.19.30.60	5	Threaded	[“kg”]
7307.19.30.70	5	With mechanical, push-on (rubber compression) or flanged joints attached	[“kg”]
7307.19.30.85	5	Other	[“kg”]
7307.19.90	3	Other		6.2%	Free (A+,AU,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	45%
7307.19.90.30	4	Unions	[“kg”]
	4	Other:
7307.19.90.40	5	Grooved-end fittings (including grooved couplings)	[“kg”]
	5	Other:
7307.19.90.60	6	Threaded	[“kg”]
7307.19.90.80	6	Other	[“kg”]
	1	Other, of stainless steel:
7307.21	2	Flanges:
7307.21.10.00	3	Not machined, not tooled and not otherwise processed after forging	[“kg”]	3.3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	34%
7307.21.50.00	3	Other	[“kg”]	5.6%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7307.22	2	Threaded elbows, bends and sleeves:
7307.22.10.00	3	Sleeves (couplings)	[“kg”]	Free		45%
7307.22.50.00	3	Other	[“kg”]	6.2%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7307.23.00	2	Butt welding fittings		5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7307.23.00.30	3	Not machined, not tooled and not otherwise processed after forming	[“kg”]
7307.23.00.90	3	Other	[“kg”]
7307.29.00	2	Other		5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7307.29.00.30	3	Nipples	[“kg”]
7307.29.00.90	3	Other	[“kg”]
	1	Other:
7307.91	2	Flanges:
	3	Not machined, not tooled and not otherwise processed after forging:
7307.91.10.00	4	Of iron or nonalloy steel	[“kg”]	3.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	25%
7307.91.30.00	4	Of alloy steel (except stainless steel)	[“kg”]	3.2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	33%
7307.91.50	3	Other		5.5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.75% (JP)	45%
	4	With an inside diameter of less than 360 mm:
7307.91.50.10	5	Of iron or nonalloy steel	[“kg”]
7307.91.50.30	5	Of alloy steel (except stainless steel)	[“kg”]
	4	With an inside diameter of 360 mm or more:
7307.91.50.50	5	Of iron or nonalloy steel	[“kg”]
7307.91.50.70	5	Of alloy steel (except stainless steel)	[“kg”]
7307.92	2	Threaded elbows, bends and sleeves:
7307.92.30	3	Sleeves (couplings)		Free		45%
7307.92.30.10	4	Of iron or nonalloy steel	[“kg”]
7307.92.30.30	4	Of alloy steel (except stainless steel)	[“kg”]
7307.92.90.00	3	Other	[“kg”]	6.2%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 3.1% (JP)	45%
7307.93	2	Butt welding fittings:
	3	With an inside diameter of less than 360 mm:
7307.93.30	4	Of iron or nonalloy steel		6.2%	Free (A+,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7307.93.30.10	5	Not machined, not tooled and not otherwise processed after forging	[“kg”]
7307.93.30.40	5	Other	[“kg”]
7307.93.60.00	4	Of alloy steel (except stainless steel)	[“kg”]	5.5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7307.93.90	3	With an inside diameter of 360 mm or more		4.3%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	4	Of iron or nonalloy steel:
7307.93.90.10	5	Not machined, not tooled and not otherwise processed after forging	[“kg”]
7307.93.90.40	5	Other	[“kg”]
7307.93.90.60	4	Of alloy steel (except stainless steel)	[“kg”]
7307.99	2	Other:
	3	Not machined, not tooled and not otherwise processed after forging:
7307.99.10.00	4	Of iron or nonalloy steel	[“kg”]	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	25%
7307.99.30.00	4	Of alloy steel (except stainless steel)	[“kg”]	3.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	33%
7307.99.50	3	Other		4.3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	45%
	4	Of iron or nonalloy steel:
7307.99.50.15	5	Nipples	[“kg”]
7307.99.50.45	5	Other	[“kg”]
7307.99.50.60	4	Of alloy steel (except stainless steel)	[“kg”]
7308	0	Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel:
7308.10.00.00	1	Bridges and bridge sections	[“kg”]	Free		45%
7308.20.00	1	Towers and lattice masts		Free		45%
7308.20.00.30	2	Tubular, whether or not tapered, and sectional components thereof	[“kg”]
7308.20.00.35	2	Tubular wind turbine towers, whether or not tapered, and sectional components thereof	[“kg”]
7308.20.00.90	2	Other	[“kg”]
7308.30	1	Doors, windows and their frames and thresholds for doors:
7308.30.10.00	2	Of stainless steel	[“kg”]	Free		35%
7308.30.50	2	Other		Free		25%
7308.30.50.15	3	Windows and their frames	[“kg”]
7308.30.50.25	3	Thresholds for doors	[“kg”]
7308.30.50.50	3	Other	[“kg”]
7308.40.00.00	1	Equipment for scaffolding, shuttering, propping or pit- propping	[“kg”]	Free		45%
7308.90	1	Other:
	2	Columns, pillars, posts, beams, girders and similar structural units:
7308.90.30.00	3	Not in part of alloy steel	[“kg”]	Free		20%
7308.90.60.00	3	Other	[“kg”]	Free		30%
	2	Other:
7308.90.70.00	3	Steel grating	[“kg”]	Free		45%
7308.90.95	3	Other		Free		45%
7308.90.95.30	4	Sheet-metal roofing, siding, flooring and roof drainage equipment	[“kg”]
	4	Other:
7308.90.95.60	5	Architectural and ornamental work	[“kg”]
7308.90.95.90	5	Other	[“kg”]
7309.00.00	0	Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment		Free		45%
7309.00.00.30	1	Tanks	[“No.”,”kg”]
7309.00.00.90	1	Other	[“No.”,”kg”]
7310	0	Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:
7310.10.00	1	Of a capacity of 50 liters or more		Free		25%
7310.10.00.05	2	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter.	[“No.”]
7310.10.00.15	2	Empty steel drums and barrels	[“No.”,”kg”]
7310.10.00.90	2	Other	[“kg”]
	1	Of a capacity of less than 50 liters:
7310.21.00	2	Cans which are to be closed by soldering or crimping		Free		25%
7310.21.00.25	3	Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods	[“No.”]
7310.21.00.70	3	Containers of a circular cross section, of a capacity not exceeding 11.4 liters, of a kind used for aerosols	[“No.”]
7310.21.00.75	3	Other	[“No.”]
7310.29.00	2	Other		Free		25%
	3	Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods:
7310.29.00.20	4	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter	[“No.”]
7310.29.00.30	4	Other	[“No.”]
	3	Other:
7310.29.00.55	4	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter	[“No.”]
7310.29.00.65	4	Other	[“No.”]
7311.00.00	0	Containers for compressed or liquefied gas, of iron or steel		Free		25%
	1	Certified prior to exportation to have been made in accordance with the safety requirements of sections 178.36 through 178.68 of title 49 CFR or under a specific exemption to those requirements:
7311.00.00.30	2	Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number	[“No.”,”kg”]
7311.00.00.60	2	Other	[“No.”,”kg”]
7311.00.00.90	1	Other	[“No.”,”kg”]
7312	0	Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated:
7312.10	1	Stranded wire, ropes and cables:
	2	Stranded wire:
	3	Of stainless steel:
7312.10.05.00	4	Fitted with fittings or made up into articles	[“kg”]	Free		45%
7312.10.10	4	Other		Free		45%
7312.10.10.30	5	Tire cord	[“kg”]
7312.10.10.50	5	Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5	[“kg”]
7312.10.10.70	5	Other	[“kg”]
	3	Other:
7312.10.20.00	4	Fitted with fittings or made up into articles	[“kg”]	Free		45%
7312.10.30	4	Other		Free		35%
7312.10.30.05	5	Tire cord	[“kg”]
	5	For prestressing concrete:
7312.10.30.10	6	Covered with textile or other non- metallic material	[“kg”]
7312.10.30.12	6	Other	[“kg”]
7312.10.30.20	5	Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5	[“kg”]
	5	Other:
7312.10.30.45	6	Of brass plated wire	[“kg”]
	6	Other:
	7	Galvanized:
7312.10.30.65	8	ACSR core strand	[“kg”]
	8	Other:
7312.10.30.70	9	Covered with textile or other nonmetallic material	[“kg”]
7312.10.30.74	9	Other	[“kg”]
7312.10.30.80	7	Other	[“kg”]
	2	Ropes, cables and cordage other than stranded wire:
	3	Of stainless steel:
7312.10.50.00	4	Fitted with fittings or made up into articles	[“kg”]	Free		45%
7312.10.60	4	Other		Free		45%
7312.10.60.30	5	With a diameter not exceeding 9.5 mm	[“kg”]
7312.10.60.60	5	Other	[“kg”]
	3	Other:
7312.10.70.00	4	Fitted with fittings or made up into articles	[“kg”]	Free		45%
	4	Other:
7312.10.80.00	5	Of brass plated wire	[“kg”]	Free		35%
7312.10.90	5	Other		Free		35%
	6	Galvanized:
7312.10.90.30	7	With a diameter not exceeding 9.5 mm	[“kg”]
7312.10.90.60	7	With a diameter exceeding 9.5 mm	[“kg”]
7312.10.90.90	6	Other	[“kg”]
7312.90.00.00	1	Other	[“kg”]	Free		45%
7313.00.00.00	0	Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel	[“kg”]	Free		Free
7314	0	Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel:
	1	Woven cloth:
7314.12	2	Endless bands for machinery, of stainless steel:
7314.12.10.00	3	With meshes not finer than 12 wires to the lineal centimeter in warp or filling	[“m2″,”kg”]	Free		35%
7314.12.20.00	3	With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling	[“m2″,”kg”]	Free		50%
	3	With meshes finer than 36 wires to the lineal centimeter in warp or filling:
	4	Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines:
7314.12.30.00	5	With 94 or more wires to the lineal centimeter	[“m2″,”kg”]	Free		75%
7314.12.60.00	5	Other	[“m2″,”kg”]	Free		75%
7314.12.90.00	4	Other	[“m2″,”kg”]	Free		60%
7314.14	2	Other woven cloth, of stainless steel:
7314.14.10.00	3	With meshes not finer than 12 wires to the lineal centimeter in warp or filling	[“m2″,”kg”]	Free		35%
7314.14.20.00	3	With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling	[“m2″,”kg”]	Free		50%
	3	With meshes finer than 36 wires to the lineal centimeter in warp or maximum:
	4	Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines:
7314.14.30.00	5	With 94 or more wires to the lineal centimeter	[“m2″,”kg”]	Free		75%
7314.14.60.00	5	Other	[“m2″,”kg”]	Free		75%
7314.14.90.00	4	Other	[“m2″,”kg”]	Free		60%
7314.19.01.00	2	Other	[“m2″,”kg”]	Free		60%
7314.20.00.00	1	Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more	[“kg”]	Free		45%
	1	Other grill, netting and fencing, welded at the intersection:
7314.31	2	Plated or coated with zinc:
7314.31.10.00	3	Wire fencing plated or coated with zinc, whether or not covered with plastic material	[“kg”]	Free		1.1¢/kg
7314.31.50	3	Other:		Free		45%
7314.31.50.10	4	Welded wire stucco netting, furred, not reinforced with supplemental horizontal wire	[“kg”]
7314.31.50.80	4	Other	[“kg”]
7314.39.00.00	2	Other	[“kg”]	Free		45%
	1	Other grill, netting and fencing:
7314.41.00	2	Plated or coated with zinc		Free		1.1¢/kg
7314.41.00.30	3	Chain link fencing	[“kg”]
	3	Woven wire stucco netting, furred, not reinforced with supplemental horizontal wire:
7314.41.00.40	4	Of wire with maximum cross- sectional dimension of 1 mm	[“kg”]
7314.41.00.45	4	Other	[“kg”]
7314.41.00.80	3	Other	[“kg”]
7314.42.00	2	Coated with plastics		Free		1.1¢/kg
7314.42.00.30	3	Chain link fencing	[“kg”]
7314.42.00.60	3	Other	[“kg”]
7314.49	2	Other:
7314.49.30.00	3	Not cut to shape	[“kg”]	Free		45%
7314.49.60.00	3	Cut to shape	[“kg”]	Free		35%
7314.50.00.00	1	Expanded metal	[“m2″,”kg”]	Free		45%
7315	0	Chain and parts thereof, of iron or steel:
	1	Articulated link chain and parts thereof:
7315.11.00	2	Roller chain		Free		40%
7315.11.00.05	3	For motor vehicles	[“kg”]
	3	Other:
	4	Of not over 50 mm pitch and containing more than 3 parts per pitch:
7315.11.00.10	5	Bicycle chains	[“kg”]
7315.11.00.45	5	Other	[“kg”]
7315.11.00.60	4	Other	[“kg”]
7315.12.00	2	Other chain		Free		40%
7315.12.00.20	3	Of not over 50 mm pitch and containing more than 3 parts per pitch	[“kg”]
	3	Other:
7315.12.00.40	4	Welded steel chain	[“kg”]
7315.12.00.60	4	Cast and combination chain	[“kg”]
7315.12.00.80	4	Other	[“kg”]
7315.19.00.00	2	Parts	[“kg”]	Free		40%
7315.20	1	Skid chain:
7315.20.10.00	2	Not over 8 mm in diameter	[“kg”]	Free		10%
7315.20.50.00	2	Over 8 mm in diameter	[“kg”]	Free		2.5¢/kg
	1	Other chain:
7315.81.00.00	2	Stud link	[“kg”]	Free		4.4¢/kg
7315.82	2	Other, welded link:
	3	Of alloy steel:
7315.82.10.00	4	Not over 10 mm in diameter	[“kg”]	Free		10%
7315.82.30.00	4	Over 10 mm in diameter	[“kg”]	Free		10%
	3	Of iron or nonalloy steel:
7315.82.50.00	4	Not over 10 mm in diameter	[“kg”]	Free		10%
7315.82.70.00	4	Over 10 mm in diameter	[“kg”]	Free		10%
7315.89	2	Other:
	3	With links of essentially round cross sections:
7315.89.10.00	4	Not over 8 mm in diameter	[“kg”]	1.5%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	10%
7315.89.30.00	4	Over 8 mm in diameter	[“kg”]	Free		4.7¢/kg
7315.89.50.00	3	Other	[“kg”]	3.9%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7315.90.00.00	1	Other parts	[“kg”]	2.9%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7316.00.00.00	0	Anchors, grapnels and parts thereof, of iron or steel	[“No.”,”kg”]	Free		25%
7317.00	0	Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper:
7317.00.10.00	1	Thumb tacks	[“kg”]	Free		4%
	1	Other, suitable for use in powder-actuated handtools:
7317.00.20.00	2	Not threaded	[“kg”]	Free		1.5¢/kg
7317.00.30.00	2	Threaded	[“kg”]	Free		45%
	1	Other:
	2	Of one piece construction:
7317.00.55	3	Made of round wire		Free		3.5%
	4	Collated nails:
7317.00.55.01	5	Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized	[“kg”]
	5	Other:
	6	Assembled in a wire coil:
7317.00.55.02	7	Galvanized	[“kg”]
7317.00.55.03	7	Other	[“kg”]
	6	Assembled in a plastic strip:
7317.00.55.05	7	Galvanized	[“kg”]
7317.00.55.07	7	Other	[“kg”]
7317.00.55.08	6	Assembled in a paper strip	[“kg”]
7317.00.55.11	6	Assembled in a wire strip	[“kg”]
7317.00.55.18	6	Other	[“kg”]
	4	Other:
7317.00.55.19	5	With a length of less than 25.4 mm and with a diameter of less than 1.65 mm	[“kg”]
	5	Other:
	6	Smooth shank:
7317.00.55.20	7	Not coated, plated or painted	[“kg”]
	7	Coated, plated or painted:
7317.00.55.30	8	Galvanized	[“kg”]
7317.00.55.40	8	Vinyl, resin or cement coated	[“kg”]
7317.00.55.50	8	Other	[“kg”]
	6	Other:
7317.00.55.60	7	Not coated, plated or painted	[“kg”]
	7	Coated, plated or painted:
7317.00.55.70	8	Galvanized	[“kg”]
7317.00.55.80	8	Vinyl, resin or cement coated	[“kg”]
7317.00.55.90	8	Other	[“kg”]
7317.00.65	3	Other		Free		5.5%
7317.00.65.30	4	Cut	[“kg”]
7317.00.65.60	4	Other	[“kg”]
7317.00.75.00	2	Of two or more pieces	[“kg”]	Free		8%
7318	0	Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel:
	1	Threaded articles:
7318.11.00.00	2	Coach screws	[“kg”]	12.5%	Free (A+,AU,B,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	25%
7318.12.00.00	2	Other wood screws	[“kg”]	12.5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7318.13.00	2	Screw hooks and screw rings		5.7%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7318.13.00.30	3	Having shanks or threads with a diameter of less than 6 mm	[“kg”]
7318.13.00.60	3	Having shanks or threads with a diameter of 6 mm or more	[“kg”]
7318.14	2	Self-tapping screws:
7318.14.10	3	Having shanks or threads with a diameter of less than 6 mm		6.2%	Free (A+,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 3.1% (JP)	45%
7318.14.10.30	4	Of stainless steel	[“kg”]
7318.14.10.60	4	Other	[“kg”]
7318.14.50	3	Having shanks or threads with a diameter of 6 mm or more		8.6%	Free (A+,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 4.3% (JP)	45%
7318.14.50.20	4	Of stainless steel	[“kg”]
7318.14.50.80	4	Other	[“kg”]
7318.15	2	Other screws and bolts, whether or not with their nuts or washers:
7318.15.20	3	Bolts and bolts and their nuts or washers entered or exported in the same shipment		Free		3.5%
7318.15.20.10	4	Having shanks or threads with a diameter of less than 6 mm	[“kg”]
	4	Having shanks or threads with a diameter of 6 mm or more:
7318.15.20.20	5	Track bolts	[“kg”]
7318.15.20.30	5	Structural bolts	[“kg”]
	5	Bent bolts:
7318.15.20.41	6	Right-angle anchor bolts	[“kg”]
7318.15.20.46	6	Other	[“kg”]
	5	Other:
	6	With round heads:
7318.15.20.51	7	Of stainless steel	[“kg”]
7318.15.20.55	7	Other	[“kg”]
	6	With hexagonal heads:
7318.15.20.61	7	Of stainless steel	[“kg”]
7318.15.20.65	7	Other	[“kg”]
	6	Other:
7318.15.20.91	7	Of stainless steel	[“kg”]
7318.15.20.95	7	Other	[“kg”]
7318.15.40.00	3	Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws)	[“kg”]	Free		2.2¢/kg
7318.15.50	3	Studs		Free		45%
7318.15.50.30	4	Of stainless steel	[“kg”]
	4	Other:
	5	Continuously threaded rod:
7318.15.50.51	6	Of alloy steel	[“kg”]
7318.15.50.56	6	Other	[“kg”]
7318.15.50.90	5	Other	[“kg”]
	3	Other:
7318.15.60	4	Having shanks or threads with a diameter of less than 6 mm		6.2%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	5	Socket screws:
7318.15.60.10	6	Of stainless steel	[“kg”]
7318.15.60.40	6	Other	[“kg”]
	5	Other:
7318.15.60.70	6	Of stainless steel	[“kg”]
7318.15.60.80	6	Other	[“kg”]
7318.15.80	4	Having shanks or threads with a diameter of 6 mm or more		8.5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7318.15.80.20	5	Set screws	[“kg”]
	5	Other:
	6	Socket screws:
7318.15.80.30	7	Of stainless steel	[“kg”]
7318.15.80.45	7	Other	[“kg”]
	6	Other:
	7	With hexagonal heads:
7318.15.80.55	8	Of stainless steel	[“kg”]
	8	Other:
7318.15.80.66	9	Cap screws	[“kg”]
7318.15.80.69	9	Other	[“kg”]
	7	Other:
7318.15.80.82	8	Of stainless steel	[“kg”]
7318.15.80.85	8	Other	[“kg”]
7318.16.00	2	Nuts		Free		0.5%
	3	Lugnuts:
7318.16.00.15	4	Non-locking chrome-plated	[“kg”]
7318.16.00.30	4	Locking	[“kg”]
7318.16.00.45	4	Other	[“kg”]
	3	Other:
7318.16.00.60	4	Of stainless steel	[“kg”]
7318.16.00.85	4	Other	[“kg”]
7318.19.00.00	2	Other	[“kg”]	5.7%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.85% (JP)	45%
	1	Non-threaded articles:
7318.21.00	2	Spring washers and other lock washers		5.8%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.9% (JP)	35%
7318.21.00.30	3	Helical spring lock washers	[“kg”]
7318.21.00.90	3	Other	[“kg”]
7318.22.00.00	2	Other washers	[“kg”]	Free		1.3¢/kg
7318.23.00.00	2	Rivets	[“kg”]	Free		2.2¢/kg
7318.24.00.00	2	Cotters and cotter pins	[“kg”]	3.8%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	45%
7318.29.00.00	2	Other	[“kg”]	2.8%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	45%
7319	0	Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included:
7319.40	1	Safety pins and other pins:
7319.40.20	2	Safety pins		4.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7319.40.20.10	3	On cards	[“gross”]
7319.40.20.50	3	Other	[“gross”]
7319.40.30.00	2	Dressmakers’ or common pins	[“kg”]	4.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7319.40.50	2	Other		Free		35%
7319.40.50.10	3	Push pins	[“kg”]
7319.40.50.50	3	Other	[“kg”]
7319.90	1	Other:
7319.90.10.00	2	Sewing, darning or embroidery needles	[“thousands”]	Free		Free
7319.90.90.00	2	Other	[“No.”]	2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7320	0	Springs and leaves for springs, of iron or steel:
7320.10	1	Leaf springs and leaves therefor:
	2	Suitable for motor vehicle suspension:
7320.10.30.00	3	To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons	[“kg”]	3.2%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7320.10.60	3	Other		3.2%	Free (A+,AU,B,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	25%
7320.10.60.15	4	Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor	[“kg”]
7320.10.60.60	4	Other	[“kg”]
7320.10.90	2	Other		3.2%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	25%
7320.10.90.15	3	Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor	[“kg”]
7320.10.90.60	3	Other	[“kg”]
7320.20	1	Helical springs:
7320.20.10.00	2	Suitable for motor-vehicle suspension	[“kg”]	3.2%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7320.20.50	2	Other		3.9%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	3	Helical springs, of wire having a cross-sectional dimension of less than 5.1 mm:
7320.20.50.10	4	Suitable for use in mattress supports and mattresses of heading 9404	[“kg”]
7320.20.50.20	4	Other	[“kg”]
7320.20.50.45	3	Helical springs, of wire having a cross-sectional dimension of 5.1 mm or more but less than 12.7 mm	[“kg”]
7320.20.50.60	3	Other	[“kg”]
7320.90	1	Other:
7320.90.10.00	2	Hairsprings	[“kg”]	Free		65%
7320.90.50	2	Other		2.9%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	45%
	3	Of wire:
7320.90.50.10	4	Suitable for use in mattress supports and mattresses of heading 9404	[“kg”]
7320.90.50.20	4	Other	[“kg”]
7320.90.50.60	3	Other	[“kg”]
7321	0	Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel:
	1	Cooking appliances and plate warmers:
7321.11	2	For gas fuel or for both gas and other fuels:
7321.11.10	3	Portable		5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7321.11.10.30	4	Stoves or ranges	[“No.”]
7321.11.10.60	4	Other	[“No.”]
	3	Other:
7321.11.30	4	Stoves or ranges:		Free		45%
7321.11.30.10	5	Of a maximum width not exceeding 70 centimeters	[“No.”]
7321.11.30.20	5	Of a maximum width exceeding 70 but not exceeding 80 centimeters	[“No.”]
7321.11.30.50	5	Of a maximum width exceeding 80 centimeters	[“No.”]
7321.11.60.00	4	Other	[“No.”]	Free		45%
7321.12.00.00	2	For liquid fuel	[“No.”]	Free		45%
7321.19.00	2	Other, including appliances for solid fuel		Free		45%
	3	Portable:
7321.19.00.20	4	Hibachis	[“No.”]
7321.19.00.40	4	Other	[“No.”]
	3	Other:
7321.19.00.60	4	Of cast iron	[“No.”]
7321.19.00.80	4	Other	[“No.”]
	1	Other appliances:
7321.81	2	For gas fuel or for both gas and other fuels:
7321.81.10.00	3	Portable	[“No.”]	2.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7321.81.50.00	3	Other	[“No.”]	Free		45%
7321.82	2	For liquid fuel:
7321.82.10.00	3	Portable	[“No.”]	2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7321.82.50.00	3	Other	[“No.”]	Free		45%
7321.89.00	2	Other, including appliances for solid fuel		Free		45%
7321.89.00.10	3	Fireplace grates of cast iron	[“No.”]
7321.89.00.50	3	Other	[“No.”]
7321.90	1	Parts:
	2	Of articles in subheading 7321.11.30:
7321.90.10.00	3	Cooking chambers, whether or not assembled	[“No.”,”kg”]	Free		45%
7321.90.20.00	3	Top surface panels with or without burners or controls	[“No.”,”kg”]	Free		45%
7321.90.40.00	3	Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulation	[“No.”,”kg”]	Free		45%
7321.90.50.00	3	Other	[“No.”,”kg”]	Free		45%
7321.90.60	2	Other		Free		45%
	3	Of cooking appliances and plate warmers:
7321.90.60.40	4	Shelving and racks for cooking ovens	[“No.”,”kg”]
7321.90.60.60	4	Other	[“No.”,”kg”]
7321.90.60.90	3	Other	[“No.”,”kg”]
7322	0	Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel:
	1	Radiators and parts thereof:
7322.11.00.00	2	Of cast iron	[“No.”]	Free		45%
7322.19.00.00	2	Other	[“No.”]	Free		45%
7322.90.00	1	Other, including parts		Free		45%
7322.90.00.15	2	Air heaters, not electrically heated, incorporating a motor-driven fan or blower	[“No.”,”kg”]
7322.90.00.30	2	Hot air distributors, not electrically heated, incorporating a motor-driven fan or blower	[“No.”,”kg”]
7322.90.00.45	2	Parts of air heaters and hot air distributors	[“No.”]
7323	0	Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel:
7323.10.00.00	1	Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like	[“kg”]	Free		22¢/kg + 30%
	1	Other:
7323.91	2	Of cast iron, not enameled:
7323.91.10.00	3	Coated or plated with precious metal	[“No.”,”kg”]	Free		20%
7323.91.50	3	Other		5.3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
7323.91.50.20	4	Bakeware (cookware not suitable for stove top use)	[“No.”,”kg”]
7323.91.50.40	4	Other	[“No.”,”kg”]
7323.92.00	2	Of cast iron, enameled		Free		35.5%
7323.92.00.20	3	Bakeware (cookware not suitable for stove top use)	[“No.”,”kg”]
7323.92.00.40	3	Other	[“No.”,”kg”]
7323.93.00	2	Of stainless steel		2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
	3	Cooking and kitchen ware:
7323.93.00.15	4	Teakettles	[“No.”,”kg”]
	4	Other:
	5	Cooking ware:
7323.93.00.35	6	Bakeware (cookware not suitable for stove top use)	[“No.”,”kg”]
7323.93.00.45	6	Other	[“No.”,”kg”]
7323.93.00.60	5	Kitchen ware	[“No.”,”kg”]
7323.93.00.80	3	Other	[“No.”,”kg”]
7323.94.00	2	Of iron (other than cast iron) or steel, enameled		2.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35.5%
	3	Cooking and kitchen ware:
	4	Of steel:
7323.94.00.10	5	Teakettles	[“No.”,”kg”]
	5	Other:
	6	Cooking ware:
7323.94.00.21	7	Bakeware (cookware not suitable for stove top use)	[“No.”,”kg”]
7323.94.00.26	7	Other	[“No.”,”kg”]
7323.94.00.30	6	Kitchen ware	[“No.”,”kg”]
7323.94.00.40	4	Other	[“No.”,”kg”]
7323.94.00.80	3	Other	[“No.”,”kg”]
7323.99	2	Other:
	3	Coated or plated with precious metal:
7323.99.10.00	4	Coated or plated with silver	[“No.”,”kg”]	Free		50%
7323.99.30.00	4	Other	[“No.”,”kg”]	8.2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	65%
	3	Not coated or plated with precious metal:
7323.99.50	4	Of tinplate		Free		40%
7323.99.50.30	5	Kitchen or tableware suitable for food or drink contact	[“No.”,”kg”]
7323.99.50.60	5	Other	[“No.”,”kg”]
	4	Other:
7323.99.70.00	5	Cookingware	[“No.”,”kg”]	5.3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
7323.99.90	5	Other		3.4%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
7323.99.90.30	6	Kitchen or tableware suitable for food or drink contact	[“No.”,”kg”]
7323.99.90.40	6	Gates for confining children or pets	[“No.”]
7323.99.90.80	6	Other	[“No.”]
7324	0	Sanitary ware and parts thereof, of iron or steel:
7324.10.00	1	Sinks and wash basins, of stainless steel		3.4%	Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
7324.10.00.10	2	Stainless steel sinks with one or more drawn bowls (basins)	[“No.”]
7324.10.00.50	2	Other	[“No.”]
	1	Baths:
7324.21	2	Of cast iron, whether or not enamelled:
7324.21.10.00	3	Coated or plated with precious metal	[“No.”]	Free		20%
7324.21.50.00	3	Other	[“No.”]	Free		40%
7324.29.00.00	2	Other	[“No.”]	Free		40%
7324.90.00.00	1	Other, including parts	[“No.”]	Free		40%
7325	0	Other cast articles of iron or steel:
7325.10.00	1	Of nonmalleable cast iron		Free		10%
7325.10.00.10	2	Manhole covers, rings and frames	[“kg”]
7325.10.00.20	2	Catch basins, grates and frames	[“kg”]
7325.10.00.25	2	Cleanout covers and frames	[“kg”]
7325.10.00.30	2	Valve and service boxes	[“kg”]
7325.10.00.35	2	Meter boxes	[“kg”]
7325.10.00.80	2	Other	[“kg”]
	1	Other:
7325.91.00.00	2	Grinding balls and similar articles for mills	[“kg”]	2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7325.99	2	Other:
7325.99.10.00	3	Of cast iron	[“kg”]	Free		20%
7325.99.50.00	3	Other	[“kg”]	2.9%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7326	0	Other articles of iron or steel:
	1	Forged or stamped, but not further worked:
7326.11.00.00	2	Grinding balls and similar articles for mills	[“kg”]	Free		27.5%
7326.19.00	2	Other		2.9%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7326.19.00.10	3	Forged	[“kg”]
7326.19.00.80	3	Other	[“kg”]
7326.20.00	1	Articles of iron or steel wire		3.9%	Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7326.20.00.10	2	Belts and belting	[“kg”]
7326.20.00.20	2	Garment hangers	[“No.”]
7326.20.00.30	2	Sod staples, U staples, irrigation staples, ground staples, and ground pins	[“No.”]
7326.20.00.40	2	Double loop bar ties and double loop wire ties	[“No.”]
7326.20.00.55	2	Paint roller frames	[“No.”]
7326.20.00.90	2	Other	[“No.”]
7326.90	1	Other:
7326.90.10.00	2	Of tinplate	[“No.”,”kg”]	Free		45%
	2	Other:
7326.90.25.00	3	Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length	[“kg”]	Free		45%
7326.90.35.00	3	Containers of a kind normally carried on the person, in the pocket or in the handbag	[“doz.”]	7.8%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	110%
7326.90.45.00	3	Horse and mule shoes	[“kg”]	Free		10%
	3	Other:
7326.90.60.00	4	Coated or plated with precious metal	[“No.”,”kg”]	8.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	65%
7326.90.86	4	Other		2.9%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	45%
7326.90.86.05	5	Rods for electrical grounding	[“kg”]
7326.90.86.10	5	Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material	[“kg”]
7326.90.86.30	5	Hangers and similar supports for tubes and pipes	[“kg”]
7326.90.86.35	5	Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with or without anchor plates	[“kg”]
7326.90.86.45	5	Barbed tape	[“kg”]
7326.90.86.60	5	Ladders	[“No.”]
7326.90.86.75	5	Paint roller frames (other than of iron or steel wire)	[“No.”]
7326.90.86.76	5	Metal handles for brooms, mops, paint applicators and similar products	[“No.”]
7326.90.86.77	5	Burial caskets	[“No.”]
7326.90.86.88	5	Other	[“kg”]

Chapter 74: Copper and articles thereof

HTS Number	Indent	Description	Unit of Quantity	General Rate of Duty	Special Rate of Duty	Column 2 Rate of Duty	Quota Quantity	Additional Duties
7401.00.00.00	0	Copper mattes; cement copper (precipitated copper)	[“kg”]	Free		6%
7402.00.00.00	0	Unrefined copper; copper anodes for electrolytic refining	[“kg”,”Cu kg”]	Free		6%
7403	0	Refined copper and copper alloys, unwrought (other than master alloys of heading 7405):
	1	Refined copper:
7403.11.00.00	2	Cathodes and sections of cathodes	[“kg”]	1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	6%
7403.12.00.00	2	Wire bars	[“kg”]	1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	6%
7403.13.00.00	2	Billets	[“kg”]	1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	6%
7403.19.00.00	2	Other	[“kg”]	1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	6%
	1	Copper alloys:
7403.21.00.00	2	Copper-zinc base alloys (brass)	[“kg”]	1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	6%
7403.22.00.00	2	Copper-tin base alloys (bronze)	[“kg”]	1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	6%
7403.29.01	2	Other copper alloys		1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	6%
7403.29.01.10	3	Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)	[“kg”]
7403.29.01.80	3	Other	[“kg”]
7404.00	0	Copper waste and scrap:
7404.00.30	1	Spent anodes; waste and scrap with a copper content of less than 94 percent by weight		Free		6%
7404.00.30.20	2	Of refined copper	[“kg”]
	2	Of copper alloys:
	3	Of copper-zinc base alloys (brass):
7404.00.30.45	4	Containing more than 0.3 percent of lead	[“kg”]
7404.00.30.55	4	Other	[“kg”]
7404.00.30.65	3	Of copper-tin base alloys (bronze)	[“kg”]
7404.00.30.90	3	Other	[“kg”]
7404.00.60	1	Other		Free		6%
7404.00.60.20	2	Of refined copper	[“kg”]
	2	Of copper alloys:
	3	Of copper-zinc base alloys (brass):
7404.00.60.45	4	Containing more than 0.3 percent of lead	[“kg”]
7404.00.60.55	4	Other	[“kg”]
7404.00.60.65	3	Of copper-tin base alloys (bronze)	[“kg”]
7404.00.60.90	3	Other	[“kg”]
7405.00	0	Master alloys of copper:
7405.00.10.00	1	Containing by weight 5 percent or more but not more than 15 percent of phosphorus	[“kg”]	Free		12%
7405.00.60	1	Other		Free		28%
7405.00.60.30	2	Beryllium copper master alloy	[“kg”]
7405.00.60.50	2	Other	[“kg”]
7406	0	Copper powders and flakes:
7406.10.00.00	1	Powders of non-lamellar structure	[“kg”]	Free		49%
7406.20.00.00	1	Powders of lamellar structure; flakes	[“kg”]	Free		12%
7407	0	Copper bars, rods and profiles:
7407.10	1	Of refined copper:
	2	Profiles:
7407.10.15.00	3	Hollow profiles	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	48%
7407.10.30.00	3	Other	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	48%
7407.10.50	2	Bars and rods		1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	7%
7407.10.50.10	3	Having a rectangular cross section	[“kg”]
7407.10.50.50	3	Other	[“kg”]
	1	Of copper alloys:
7407.21	2	Of copper-zinc base alloys (brass):
	3	Profiles:
7407.21.15.00	4	Hollow profiles	[“kg”]	2.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	17%
7407.21.30.00	4	Other	[“kg”]	2.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	17%
	3	Bars and rods:
7407.21.50.00	4	Low fuming brazing rods	[“kg”]	2.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	9%
	4	Other:
7407.21.70.00	5	Having a rectangular cross section	[“kg”]	1.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	9%
7407.21.90.00	5	Other	[“kg”]	2.2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	9%
7407.29	2	Other:
	3	Profiles:
7407.29.16	4	Hollow		3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	48%
7407.29.16.10	5	Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)	[“kg”]
7407.29.16.80	5	Other	[“kg”]
	4	Other:
7407.29.34.00	5	Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	48%
7407.29.38.00	5	Other	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	48%
7407.29.40.00	3	Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	48%
7407.29.50.00	3	Other bars and rods	[“kg”]	1.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	9%
7408	0	Copper wire:
	1	Of refined copper:
7408.11	2	Of which the maximum cross-sectional dimension exceeds 6 mm:
7408.11.30.00	3	With a maximum cross-sectional dimension over 9.5 mm	[“kg”]	1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	7%
7408.11.60.00	3	With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm	[“kg”]	3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	28%
7408.19.00	2	Other		3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	28%
7408.19.00.30	3	With a maximum cross-sectional dimension of 3 mm or less	[“kg”]
7408.19.00.60	3	Other	[“kg”]
	1	Of copper alloys:
7408.21.00.00	2	Of copper-zinc base alloys (brass)	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	28%
7408.22	2	Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver):
7408.22.10.00	3	Coated or plated with metal	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	28%
7408.22.50.00	3	Not coated or plated with metal	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	28%
7408.29	2	Other:
7408.29.10.00	3	Coated or plated with metal	[“kg”]	3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	28%
7408.29.50.00	3	Not coated or plated with metal	[“kg”]	3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	28%
7409	0	Copper plates, sheets and strip, of a thickness exceeding 0.15 mm:
	1	Of refined copper:
7409.11	2	In coils:
7409.11.10.00	3	Of a thickness of 5 mm or more	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	38%
7409.11.50	3	Of a thickness of less than 5 mm		1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	7.5%
7409.11.50.10	4	Of a width of 500 mm or more	[“kg”]
7409.11.50.50	4	Of a width of less than 500 mm	[“kg”]
7409.19	2	Other:
7409.19.10.00	3	Of a thickness of 5 mm or more	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	48%
	3	Of a thickness of less than 5 mm:
7409.19.50.00	4	Of a width of 500 mm or more	[“kg”]	1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	7.5%
7409.19.90.00	4	Of a width of less than 500 mm	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	48%
	1	Of copper-zinc base alloys (brass):
7409.21.00	2	In coils		1.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	9%
7409.21.00.10	3	Of a thickness of 5 mm or more	[“kg”]
	3	Of a thickness of less than 5 mm:
7409.21.00.50	4	Of a width of 500 mm or more	[“kg”]
	4	Of a width of less than 500 mm:
7409.21.00.75	5	Of a thickness less than 1.6 mm	[“kg”]
7409.21.00.90	5	Other	[“kg”]
7409.29.00	2	Other		1.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	9%
7409.29.00.10	3	Of a thickness of 5 mm or more	[“kg”]
	3	Of a thickness of less than 5 mm:
7409.29.00.50	4	Of a width of 500 mm or more	[“kg”]
	4	Of a width of less than 500 mm:
7409.29.00.75	5	Of a thickness less than 1.6 mm	[“kg”]
7409.29.00.90	5	Other	[“kg”]
	1	Of copper-tin base alloys (bronze):
7409.31	2	In coils:
7409.31.10.00	3	Of a thickness of 5 mm or more	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	49%
	3	Of a thickness of less than 5 mm:
7409.31.50.00	4	Of a width of 500 mm or more	[“kg”]	1.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	9%
7409.31.90.00	4	Of a width of less than 500 mm	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	49%
7409.39	2	Other:
7409.39.10	3	Of a thickness of 5 mm or more		3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	49%
7409.39.10.30	4	Of phosphor bronze	[“kg”,”Cu kg”]
7409.39.10.60	4	Other	[“kg”,”Cu kg”]
	3	Of a thickness of less than 5 mm:
7409.39.50.00	4	Of a width of 500 mm or more	[“kg”]	1.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	9%
7409.39.90	4	Of a width of less than 500 mm		3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	49%
7409.39.90.30	5	Of phosphor bronze	[“kg”,”Cu kg”]
7409.39.90.60	5	Other	[“kg”,”Cu kg”]
7409.40.00.00	1	Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel silver)	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	48%
7409.90	1	Of other copper alloys:
7409.90.10	2	Of a thickness of 5 mm or more		3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	49%
7409.90.10.30	3	Of beryllium copper	[“kg”,”Cu kg”]
7409.90.10.60	3	Other	[“kg”,”Cu kg”]
	2	Of a thickness of less than 5 mm:
7409.90.50	3	Of a width of 500 mm or more		1.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	9%
7409.90.50.30	4	Of beryllium copper	[“kg”,”Cu kg”]
7409.90.50.60	4	Other	[“kg”,”Cu kg”]
7409.90.90	3	Of a width of less than 500 mm		3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	49%
7409.90.90.30	4	Of beryllium copper	[“kg”,”Cu kg”]
7409.90.90.60	4	Other	[“kg”,”Cu kg”]
7410	0	Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm:
	1	Not backed:
7410.11.00.00	2	Of refined copper	[“kg”]	1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	6.5%
7410.12.00	2	Of copper alloys		1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	6.5%
7410.12.00.30	3	Of copper-zinc base alloys (brass)	[“kg”]
7410.12.00.60	3	Other	[“kg”]
	1	Backed:
7410.21	2	Of refined copper:
7410.21.30	3	Copper clad laminates		3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	80%
	4	Having a base wholly of plastics impregnated glass:
7410.21.30.20	5	Having copper on one side only	[“m2″,”kg”]
7410.21.30.40	5	Having copper on both sides	[“m2″,”kg”]
7410.21.30.60	4	Other	[“m2″,”kg”]
7410.21.60.00	3	Other	[“kg”]	1.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	6%
7410.22.00.00	2	Of copper alloys	[“kg”]	1.5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	6%
7411	0	Copper tubes and pipes:
7411.10	1	Of refined copper:
7411.10.10	2	Seamless		1.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	13%
7411.10.10.30	3	Having an outside diameter of 6 mm or more but not exceeding 16 mm, in coils on spools	[“kg”]
7411.10.10.90	3	Other	[“kg”]
7411.10.50.00	2	Other	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	47%
	1	Of copper alloys:
7411.21	2	Of copper-zinc base alloys (brass):
7411.21.10.00	3	Seamless	[“kg”]	1.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	10%
7411.21.50.00	3	Other	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	49%
7411.22.00.00	2	Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel-silver)	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	47%
7411.29	2	Other:
7411.29.10.00	3	Seamless	[“kg”]	1.4%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	10%
7411.29.50.00	3	Other	[“kg”]	3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	49%
7412	0	Copper tube or pipe fittings (for example couplings, elbows, sleeves):
7412.10.00.00	1	Of refined copper	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	46%
7412.20.00	1	Of copper alloys		3%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	49%
7412.20.00.15	2	For brake hoses for vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29 or headings 8702, 8703, 8704, or 8705	[“kg”]
	2	Other:
	3	Of copper-zinc base alloys (brass):
	4	Threaded:
7412.20.00.25	5	Nipples	[“kg”]
7412.20.00.35	5	Other	[“kg”]
7412.20.00.45	4	Other	[“kg”]
	3	Other:
	4	Threaded:
7412.20.00.65	5	Nipples	[“kg”]
7412.20.00.85	5	Other	[“kg”]
7412.20.00.90	4	Other	[“kg”]
7413.00	0	Stranded wire, cables, plaited bands and the like, including slings and similar articles, of copper, not electrically insulated:
	1	Not fitted with fittings and not made up into articles:
7413.00.10.00	2	Stranded wire	[“kg”]	3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7413.00.50.00	2	Other	[“kg”]	2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7413.00.90.00	1	Fitted with fittings or made up into articles	[“kg”]	3%	Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7415	0	Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper:
7415.10.00.00	1	Nails and tacks, drawing pins, staples and similar articles	[“kg”]	2.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	1	Other articles, not threaded:
7415.21.00.00	2	Washers (including spring washers)	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7415.29.00.00	2	Other	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	1	Other threaded articles:
7415.33	2	Screws, bolts and nuts:
7415.33.05.00	3	Screws for wood	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7415.33.10.00	3	Muntz or yellow metal bolts	[“kg”]	1.4%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	7%
7415.33.80	3	Other screws and bolts; nuts		3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7415.33.80.10	4	Having shanks, threads or holes 6 mm or more in diameter	[“kg”]
7415.33.80.50	4	Having shanks, threads or holes less than 6 mm in diameter	[“kg”]
7415.39.00.00	2	Other	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7418	0	Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper:
7418.10.00	1	Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like		3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
	2	Pot scourers and scouring or polishing pads, gloves and the like:
7418.10.00.02	3	Of copper-zinc base alloys (brass)	[“kg”]
7418.10.00.04	3	Other	[“kg”]
	2	Other:
7418.10.00.19	3	Coated or plated with precious metals	[“kg”]
	3	Other:
	4	Of copper-zinc base alloys (brass):
7418.10.00.21	5	Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof	[“kg”]
7418.10.00.23	5	Cooking and kitchen ware	[“kg”]
7418.10.00.25	5	Other	[“kg”]
	4	Other:
7418.10.00.51	5	Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof	[“kg”]
7418.10.00.53	5	Cooking and kitchen ware	[“No.”,”kg”]
7418.10.00.55	5	Other	[“kg”]
7418.20	1	Sanitary ware and parts thereof:
7418.20.10.00	2	Of copper-zinc base alloys (brass)	[“kg”]	3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
7418.20.50.00	2	Other	[“kg”]	3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
7419	0	Other articles of copper:
7419.20.00	1	Cast, molded, stamped or forged, but not further worked		Free		46%
7419.20.00.10	2	Brass plumbing goods, not elsewhere specified or included	[“kg”]
7419.20.00.50	2	Other	[“kg”]
7419.80	1	Other:
	2	Cloth (including endless bands), grill and netting, of copper wire; expanded metal of copper:
	3	Cloth:
7419.80.03.00	4	Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with 94 or more wires to the lineal centimeter	[“m2″,”kg”]	Free		75%
7419.80.06	4	Other		3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	43%
7419.80.06.60	5	Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with fewer than 94 or more wires to the lineal centimeter	[“m2″,”kg”]
7419.80.06.80	5	Other	[“m2″,”kg”]
7419.80.09.00	3	Other	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	43%
7419.80.15.00	2	Containers of a kind normally carried on the person, in the pocket or in the handbag	[“doz.”]	3%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	110%
7419.80.16.00	2	Copper springs	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7419.80.17.00	2	Chain and parts thereof	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	2	Other:
7419.80.30.00	3	Coated or plated with precious metal	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	65%
7419.80.50	3	Other		Free		46%
7419.80.50.10	4	Brass plumbing goods not elsewhere specified or included	[“kg”]
7419.80.50.50	4	Other	[“kg”]

Chapter 75: Nickel and articles thereof

HTS Number	Indent	Description	Unit of Quantity	General Rate of Duty	Special Rate of Duty	Column 2 Rate of Duty	Quota Quantity	Additional Duties
7501	0	Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy:
7501.10.00.00	1	Nickel mattes	[“kg”,”Ni kg”]	Free		Free
7501.20.00.00	1	Nickel oxide sinters and other intermediate products of nickel metallurgy	[“kg”,”Ni kg”]	Free		Free
7502	0	Unwrought nickel:
7502.10.00.00	1	Nickel, not alloyed	[“kg”]	Free		6.6¢/kg
7502.20.00.00	1	Nickel alloys	[“kg”]	Free		6.6¢/kg
7503.00.00.00	0	Nickel waste and scrap	[“kg”]	Free		6.6¢/kg
7504.00.00	0	Nickel powders and flakes		Free		6.6¢/kg
7504.00.00.10	1	Powders	[“kg”]
7504.00.00.50	1	Flakes	[“kg”]
7505	0	Nickel bars, rods, profiles and wire:
	1	Bars, rods and profiles:
7505.11	2	Of nickel, not alloyed:
	3	Bars and rods:
7505.11.10.00	4	Cold-formed	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7505.11.30.00	4	Not cold-formed	[“kg”]	2.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7505.11.50.00	3	Profiles	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7505.12	2	Of nickel alloys:
	3	Bars and rods:
7505.12.10.00	4	Cold-formed	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7505.12.30.00	4	Not cold-formed	[“kg”]	2.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7505.12.50.00	3	Profiles	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	1	Wire:
7505.21	2	Of nickel, not alloyed:
7505.21.10.00	3	Cold-formed	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7505.21.50.00	3	Not cold-formed	[“kg”]	2.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7505.22	2	Of nickel alloys:
7505.22.10.00	3	Cold-formed	[“kg”]	3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7505.22.50.00	3	Not cold-formed	[“kg”]	2.6%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7506	0	Nickel plates, sheets, strip and foil:
7506.10	1	Of nickel, not alloyed:
7506.10.05.00	2	Not exceeding 0.15 mm in thickness	[“kg”]	2.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	2	Other:
7506.10.10.00	3	Cold-formed	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7506.10.30.00	3	Not cold-formed	[“kg”]	2.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7506.20	1	Of nickel alloys:
7506.20.05.00	2	Not exceeding 0.15 mm in thickness	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	2	Other:
7506.20.10.00	3	Cold-formed	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7506.20.30.00	3	Not cold-formed	[“kg”]	2.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7507	0	Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves):
	1	Tubes and pipes:
7507.11.00.00	2	Of nickel, not alloyed	[“kg”]	2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7507.12.00.00	2	Of nickel alloys	[“kg”]	2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7507.20.00.00	1	Tube or pipe fittings	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7508	0	Other articles of nickel:
7508.10.00.00	1	Cloth, grill and netting, of nickel wire	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7508.90	1	Other:
7508.90.10.00	2	Stranded wire	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7508.90.50.00	2	Other	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%

Chapter 76: Aluminum and articles thereof

HTS Number	Indent	Description	Unit of Quantity	General Rate of Duty	Special Rate of Duty	Column 2 Rate of Duty	Quota Quantity	Additional Duties
7601	0	Unwrought aluminum:
7601.10	1	Aluminum, not alloyed:
7601.10.30.00	2	Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils	[“kg”]	2.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	18.5%
7601.10.60	2	Other		Free		11%
7601.10.60.40	3	Of 99.9 percent aluminum or greater	[“kg”]
7601.10.60.45	3	Of greater than 99.8 percent but less than 99.9 percent	[“kg”]
7601.10.60.90	3	Other	[“kg”]
7601.20	1	Aluminum alloys:
7601.20.30.00	2	Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils	[“kg”]	2.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	18.5%
	2	Other:
7601.20.60.00	3	Containing 25 percent or more by weight of silicon	[“kg”]	2.1%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	25%
7601.20.90	3	Other		Free		10.5%
7601.20.90.30	4	Aluminum vanadium master alloy	[“kg”]
	4	Other:
7601.20.90.45	5	Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils	[“kg”]
7601.20.90.60	5	Other, containing 0.03 percent or more by weight of lead (secondary aluminum)	[“kg”]
	5	Other:
7601.20.90.75	6	Remelt scrap ingot	[“kg”]
7601.20.90.80	6	Sheet ingot (slab) of a kind described in statistical note 3 to this chapter	[“kg”]
7601.20.90.85	6	Foundry ingot of a kind described in statistical note 4 to this chapter	[“kg”]
7601.20.90.95	6	Other	[“kg”]
7602.00.00	0	Aluminum waste and scrap		Free		Free
7602.00.00.35	1	Recyclable used beverage containers	[“kg”]
7602.00.00.95	1	Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chips	[“kg”]
7602.00.00.97	1	Other recyclable aluminum	[“kg”]
7602.00.00.98	1	Other	[“kg”]
7603	0	Aluminum powders and flakes:
7603.10.00.00	1	Powders of non-lamellar structure	[“kg”]	5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7603.20.00.00	1	Powders of lamellar structure; flakes	[“kg”]	3.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	11%
7604	0	Aluminum bars, rods and profiles:
7604.10	1	Of aluminum, not alloyed:
7604.10.10.00	2	Profiles	[“kg”]	5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	2	Bars and rods:
7604.10.30.00	3	Having a round cross section	[“kg”]	2.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	11%
7604.10.50.00	3	Other	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	13.5%
	1	Of aluminum alloys:
7604.21.00	2	Hollow profiles		1.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	15.5%
7604.21.00.10	3	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	[“kg”]
7604.21.00.90	3	Other	[“kg”]
7604.29	2	Other:
7604.29.10	3	Other profiles		5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7604.29.10.10	4	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	[“kg”]
7604.29.10.90	4	Other	[“kg”]
	3	Bars and rods:
7604.29.30	4	Having a round cross section		2.6%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	11%
7604.29.30.30	5	High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter	[“kg”]
7604.29.30.60	5	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	[“kg”]
7604.29.30.90	5	Other	[“kg”]
7604.29.50	4	Other		3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	13.5%
7604.29.50.20	5	High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter	[“kg”]
7604.29.50.50	5	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	[“kg”]
7604.29.50.90	5	Other	[“kg”]
7605	0	Aluminum wire:
	1	Of aluminum, not alloyed:
7605.11.00.00	2	Of which the maximum cross-sectional dimension exceeds 7 mm	[“kg”]	2.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	11%
7605.19.00.00	2	Other	[“kg”]	4.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
	1	Of aluminum alloys:
7605.21.00.00	2	Of which the maximum cross-sectional dimension exceeds 7 mm	[“kg”]	2.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	11%
7605.29.00.00	2	Other	[“kg”]	4.2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7606	0	Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm:
	1	Rectangular (including square):
7606.11	2	Of aluminum, not alloyed:
7606.11.30	3	Not clad		3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	13.5%
7606.11.30.30	4	With a thickness of more than 6.3 mm	[“kg”]
7606.11.30.60	4	With a thickness of 6.3 mm or less	[“kg”]
7606.11.60.00	3	Clad	[“kg”]	2.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	9.5%
7606.12	2	Of aluminum alloys:
7606.12.30	3	Not clad		3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	13.5%
	4	With a thickness of more than 6.3 mm:
7606.12.30.15	5	High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter	[“kg”]
7606.12.30.25	5	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	[“kg”]
7606.12.30.35	5	Other	[“kg”]
	4	With a thickness of 6.3 mm or less:
	5	Aluminum can stock:
7606.12.30.45	6	Body stock	[“kg”]
7606.12.30.55	6	Lid stock	[“kg”]
	5	Other:
7606.12.30.91	6	Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter	[“kg”]
7606.12.30.96	6	Other	[“kg”]
7606.12.60.00	3	Clad	[“kg”]	6.5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	30%
	1	Other:
7606.91	2	Of aluminum, not alloyed:
7606.91.30	3	Not clad		3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	13.5%
7606.91.30.55	4	With a thickness of more than 6.3 mm	[“kg”]
7606.91.30.95	4	With a thickness of 6.3 mm or less	[“kg”]
7606.91.60	3	Clad		2.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	9.5%
7606.91.60.55	4	With a thickness of more than 6.3 mm	[“kg”]
7606.91.60.95	4	With a thickness of 6.3 mm or less	[“kg”]
7606.92	2	Of aluminum alloys:
7606.92.30	3	Not clad		3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	13.5%
7606.92.30.25	4	With a thickness of more than 6.3 mm	[“kg”]
7606.92.30.35	4	With a thickness of 6.3 mm or less	[“kg”]
7606.92.60	3	Clad		6.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	30%
7606.92.60.55	5	With a thickness of more than 6.3 mm	[“kg”]
7606.92.60.95	5	With a thickness of 6.3 mm or less	[“kg”]
7607	0	Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm:
	1	Not backed:
7607.11	2	Rolled but not further worked:
	3	Of a thickness not exceeding 0.15 mm:
7607.11.30.00	4	Of a thickness not exceeding 0.01 mm	[“kg”]	5.8%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
7607.11.60	4	Of a thickness exceeding 0.01 mm		5.3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
7607.11.60.10	5	Boxed aluminum foil weighing not more than 11.3 kg	[“kg”,”m2″]
7607.11.60.90	5	Other	[“kg”,”m2″]
7607.11.90	3	Other		3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	13.5%
	4	Aluminum can stock:
7607.11.90.30	5	Body stock	[“kg”]
7607.11.90.60	5	Lid stock	[“kg”]
7607.11.90.90	4	Other	[“kg”]
7607.19	2	Other:
7607.19.10.00	3	Etched capacitor foil	[“kg”]	5.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
	3	Other:
7607.19.30.00	4	Cut to shape, of a thickness not exceeding 0.15 mm	[“kg”]	5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7607.19.60.00	4	Other	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	13.5%
7607.20	1	Backed:
7607.20.10.00	2	Covered or decorated with a character, design, fancy effect or pattern	[“kg”]	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	22.5%
7607.20.50.00	2	Other	[“kg”]	Free		23%
7608	0	Aluminum tubes and pipes:
7608.10.00	1	Of aluminum, not alloyed		5.7%	Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7608.10.00.30	2	Seamless	[“kg”]
7608.10.00.90	2	Other	[“kg”]
7608.20.00	1	Of aluminum alloys		5.7%	Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7608.20.00.30	2	Seamless	[“kg”]
7608.20.00.90	2	Other	[“kg”]
7609.00.00.00	0	Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves)	[“kg”]	5.7%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7610	0	Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures:
7610.10.00	1	Doors, windows and their frames and thresholds for doors		5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7610.10.00.10	2	Windows and their frames	[“kg”]
7610.10.00.20	2	Thresholds for doors	[“kg”]
7610.10.00.30	2	Other	[“kg”]
7610.90.00	1	Other		5.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7610.90.00.20	2	Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment	[“kg”]
7610.90.00.40	2	Architectural and ornamental work	[“kg”]
	2	Other:
7610.90.00.60	3	Mobile homes	[“kg”]
7610.90.00.80	3	Other	[“kg”]
7611.00.00	0	Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment		2.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7611.00.00.30	1	Tanks	[“No.”]
7611.00.00.90	1	Other	[“No.”]
7612	0	Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:
7612.10.00.00	1	Collapsible tubular containers	[“No.”]	2.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7612.90	1	Other:
7612.90.10	2	Of a capacity not exceeding 20 liters		5.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	3	Cans of a capacity not exceeding 355 ml:
7612.90.10.40	4	With a circular cross section, of a kind used for aerosols	[“No.”]
7612.90.10.45	4	Other	[“No.”]
7612.90.10.60	3	Cans of a capacity exceeding 355 ml but less than 3.8 liters	[“No.”]
7612.90.10.90	3	Other	[“No.”]
7612.90.50.00	2	Other	[“No.”]	Free		25%
7613.00.00.00	0	Aluminum containers for compressed or liquefied gas	[“No.”]	5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7614	0	Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated:
7614.10	1	With steel core:
7614.10.10.00	2	Not fitted with fittings and not made up into articles	[“kg”]	4.9%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	35%
7614.10.50.00	2	Fitted with fittings or made up into articles	[“kg”]	4.9%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7614.90	1	Other:
	2	Not fitted with fittings and not made up into articles:
7614.90.20	3	Electrical conductors		4.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
7614.90.20.30	4	With a cross-sectional area less than 240 mm²	[“kg”]
7614.90.20.60	4	With a cross-sectional area greater than or equal to 240 mm²	[“kg”]
7614.90.40.00	3	Other	[“kg”]	4.9%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	35%
7614.90.50.00	2	Fitted with fittings or made up into articles	[“kg”]	5.7%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7615	0	Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum:
7615.10	1	Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like:
7615.10.11.00	2	Pot scourers and scouring or polishing pads, gloves and the like	[“kg”]	3.1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45.5%
	2	Other:
	3	Cooking and kitchen ware:
	4	Enameled or glazed or containing nonstick interior finishes:
7615.10.20	5	Cast		3.1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45.5%
7615.10.20.15	6	Bakeware (cookware not suitable for stove top use)	[“No.”,”kg”]
7615.10.20.25	6	Other	[“No.”,”kg”]
7615.10.30	5	Other		3.1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45.5%
7615.10.30.15	6	Bakeware (cookware not suitable for stove top use)	[“No.”,”kg”]
7615.10.30.25	6	Other	[“No.”,”kg”]
	4	Not enameled or glazed and not containing nonstick interior finishes:
7615.10.50	5	Cast		3.1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45.5%
7615.10.50.20	6	Bakeware (cookware not suitable for stove top use)	[“No.”,”kg”]
7615.10.50.40	6	Other	[“No.”,”kg”]
7615.10.71	5	Other		3.1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45.5%
7615.10.71.25	6	Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thickness	[“No.”,”kg”]
	6	Other cookware:
7615.10.71.30	7	Bakeware (cookware not suitable for stove top use)	[“No.”,”kg”]
7615.10.71.55	7	Other	[“No.”,”kg”]
7615.10.71.80	6	Other	[“No.”,”kg”]
7615.10.91.00	3	Other	[“kg”]	3.1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45.5%
7615.20.00.00	1	Sanitary ware and parts thereof	[“kg”]	3.8%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45.5%
7616	0	Other articles of aluminum:
7616.10	1	Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles:
7616.10.10.00	2	Nails, tacks and staples	[“kg”]	5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7616.10.30.00	2	Rivets	[“kg”]	4.7%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7616.10.50.00	2	Cotters and cotter pins	[“kg”]	5.7%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	2	Other:
7616.10.70	3	Having shanks, threads or holes over 6 mm in diameter		5.5%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.75% (JP)	45%
7616.10.70.30	4	Threaded fasteners	[“kg”]
7616.10.70.90	4	Other	[“kg”]
7616.10.90	3	Other		6%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7616.10.90.30	4	Threaded fasteners	[“kg”]
7616.10.90.90	4	Other	[“kg”]
	1	Other:
7616.91.00.00	2	Cloth, grill, netting and fencing, of aluminum wire	[“kg”]	2.5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7616.99	2	Other:
7616.99.10.00	3	Luggage frames	[“kg”]	Free		45%
7616.99.51	3	Other		2.5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7616.99.51.20	4	Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material	[“kg”]
7616.99.51.30	4	Ladders	[“No.”]
7616.99.51.40	4	Venetian blinds and parts thereof	[“No.”]
7616.99.51.50	4	Hangers and supports for pipes and tubes	[“kg”]
	4	Other:
7616.99.51.60	5	Castings	[“kg”]
7616.99.51.70	5	Forgings	[“kg”]
	5	Other:
7616.99.51.75	6	Articles of wire	[“kg”]
7616.99.51.90	6	Other	[“kg”]

Chapter 77: (Reserved for possible future use)

Reserved for possible future use.

Chapter 78: Lead and articles thereof

HTS Number	Indent	Description	Unit of Quantity	General Rate of Duty	Special Rate of Duty	Column 2 Rate of Duty	Quota Quantity	Additional Duties
7801	0	Unwrought lead:
7801.10.00.00	1	Refined lead	[“kg”]	2.5% on the value of the lead content	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	10%
	1	Other:
7801.91.00.00	2	Containing by weight antimony as the principal other element	[“kg”,”Pb kg”]	2.5% on the value of the lead content	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	10%
7801.99	2	Other:
7801.99.30.00	3	Lead bullion	[“kg”,”Pb kg”]	2.5% on the value of the lead content	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	10.5%
7801.99.90	3	Other		2.5% on the value of the lead content	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	10%
7801.99.90.30	4	Alloys of lead	[“kg”,”Pb kg”]
7801.99.90.50	4	Other	[“kg”,”Pb kg”]
7802.00.00	0	Lead waste and scrap		Free		11.5%
7802.00.00.30	1	Obtained from lead-acid storage batteries	[“kg”,”Pb kg”]
7802.00.00.60	1	Other	[“kg”,”Pb kg”]
7804	0	Lead plates, sheets, strip and foil; lead powders and flakes:
	1	Plates, sheets, strip and foil:
7804.11.00.00	2	Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0.2 mm	[“kg”]	2.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7804.19.00.00	2	Other	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7804.20.00.00	1	Powders and flakes	[“kg”]	Free		45%
7806	0	Other articles of lead:
7806.00.03.00	1	Lead bars, rods, profiles and wire	[“kg”]	1.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7806.00.05.00	1	Lead tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)	[“kg”]	2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7806.00.80.00	1	Other	[“kg”]	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%

Chapter 79: Zinc and articles thereof

HTS Number	Indent	Description	Unit of Quantity	General Rate of Duty	Special Rate of Duty	Column 2 Rate of Duty	Quota Quantity	Additional Duties
7901	0	Unwrought zinc:
	1	Zinc, not alloyed:
7901.11.00.00	2	Containing by weight 99.99 percent or more of zinc	[“kg”]	1.5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	5%
7901.12	2	Containing by weight less than 99.99 percent of zinc:
7901.12.10.00	3	Casting-grade zinc	[“kg”]	3%	Free (A+,AU,BH,CL,CO,D,E, IL,JO,KR,MA,OM,P,PA, PE,S,SG)	45%
7901.12.50.00	3	Other	[“kg”]	1.5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	5%
7901.20.00.00	1	Zinc alloys	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7902.00.00.00	0	Zinc waste and scrap	[“kg”]	Free		11%
7903	0	Zinc dust, powders and flakes:
7903.10.00.00	1	Zinc dust	[“kg”]	0.7¢/kg	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	3.9¢/kg
7903.90	1	Other:
7903.90.30.00	2	Powders	[“kg”]	0.5¢/kg	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	3.9¢/kg
7903.90.60.00	2	Other	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7904.00.00.00	0	Zinc bars, rods, profiles and wire	[“kg”]	4.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
7905.00.00.00	0	Zinc plates, sheets, strip and foil	[“kg”]	2.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7907.00	0	Other articles of zinc:
7907.00.10.00	1	Articles of a type used for household, table or kitchen use; toilet and sanitary wares; all the foregoing and parts thereof of zinc	[“kg”]	3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
7907.00.20.00	1	Zinc tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)	[“kg”]	3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
7907.00.60.00	1	Other	[“kg”]	3%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%

Chapter 80: Tin and articles thereof

HTS Number	Indent	Description	Unit of Quantity	General Rate of Duty	Special Rate of Duty	Column 2 Rate of Duty	Quota Quantity	Additional Duties
8001	0	Unwrought tin:
8001.10.00.00	1	Tin, not alloyed	[“kg”]	Free		Free
8001.20.00	1	Tin alloys		Free		Free
8001.20.00.10	2	Containing, by weight, 5 percent or less of lead	[“kg”]
8001.20.00.50	2	Containing, by weight, more than 5 percent but not more than 25 percent of lead	[“kg”,”Pb kg”]
8001.20.00.90	2	Containing, by weight, more than 25 percent of lead	[“kg”,”Pb kg”]
8002.00.00.00	0	Tin waste and scrap	[“kg”]	Free		Free
8003.00.00.00	0	Tin bars, rods, profiles and wire	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8007.00	0	Other articles of tin:
8007.00.10	1	Articles not elsewhere specified or included of a type used for household, table or kitchen use; toilet and sanitary wares; all the foregoing not coated or plated with precious metal		2.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
8007.00.10.10	2	Suitable for food or beverage service	[“No.”]
8007.00.10.50	2	Other	[“No.”]
8007.00.20.00	1	Tin plates, sheets and strip, of a thickness exceeding 0.2 mm	[“kg”]	2.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8007.00.31.00	1	Tin foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.2 mm	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
8007.00.32.00	1	Powders and flakes	[“kg”]	2.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8007.00.40.00	1	Tin tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)	[“kg”]	2.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8007.00.50.00	1	Other	[“kg”]	2.8%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%

Chapter 81: Other base metals; cermets; articles thereof

HTS Number	Indent	Description	Unit of Quantity	General Rate of Duty	Special Rate of Duty	Column 2 Rate of Duty	Quota Quantity	Additional Duties
8101	0	Tungsten (wolfram) and articles thereof, including waste and scrap:
8101.10.00.00	1	Powders	[“kg”,”W kg”]	7%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	58%
	1	Other:
8101.94.00.00	2	Unwrought tungsten, including bars and rods obtained simply by sintering	[“kg”]	6.6%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	60%
8101.96.00.00	2	Wire	[“kg”]	4.4%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	60%
8101.97.00.00	2	Waste and scrap	[“kg”,”W kg”]	2.8%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	50%
8101.99	2	Other:
8101.99.10.00	3	Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil	[“kg”]	6.5%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	60%
8101.99.80.00	3	Other	[“kg”]	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8102	0	Molybdenum and articles thereof, including waste and scrap:
8102.10.00.00	1	Powders	[“kg”,”Mo kg”]	9.1¢/kg on molybdenum content + 1.2%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	$1.10/kg on molybdenum content + 15%
	1	Other:
8102.94.00.00	2	Unwrought molybdenum, including bars and rods obtained simply by sintering	[“kg”,”Mo kg”]	13.9¢/kg on molybdenum content + 1.9%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	$1.10/kg on molybdenum content + 15%
8102.95	2	Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil:
8102.95.30.00	3	Bars and rods	[“kg”]	6.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8102.95.60.00	3	Other	[“kg”]	6.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8102.96.00.00	2	Wire	[“kg”]	4.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8102.97.00.00	2	Waste and scrap	[“kg”,”Mo kg”]	Free		Free
8102.99.00.00	2	Other	[“kg”]	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8103	0	Tantalum and articles thereof, including waste and scrap:
8103.20.00	1	Unwrought tantalum, including bars and rods obtained simply by sintering; powders		2.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
8103.20.00.30	2	Powders	[“kg”]
8103.20.00.90	2	Other	[“kg”]
8103.30.00.00	1	Waste and scrap	[“kg”]	Free		Free
	1	Other:
8103.91.00.00	2	Crucibles	[“kg”]	4.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8103.99.00.00	2	Other	[“kg”]	4.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8104	0	Magnesium and articles thereof, including waste and scrap:
	1	Unwrought magnesium:
8104.11.00.00	2	Containing at least 99.8 percent by weight of magnesium	[“kg”]	8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	100%
8104.19.00.00	2	Other	[“kg”,”Mg kg”]	6.5%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	60.5%
8104.20.00.00	1	Waste and scrap	[“kg”]	Free		Free
8104.30.00.00	1	Raspings, turnings and granules, graded according to size; powders	[“kg”,”Mg kg”]	4.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60.5%
8104.90.00.00	1	Other	[“kg”,”Mg kg”]	14.8¢/kg on magnesium content + 3.5%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	88¢/kg on magnesium content + 20%
8105	0	Cobalt mattes and other intermediate products of cobalt metallurgy; cobalt and articles thereof, including waste and scrap:
8105.20	1	Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; powders:
	2	Unwrought cobalt:
8105.20.30.00	3	Alloys	[“kg”]	4.4%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	45%
8105.20.60.00	3	Other	[“kg”]	Free		Free
8105.20.90.00	2	Other	[“kg”]	Free		Free
8105.30.00.00	1	Waste and scrap	[“kg”]	Free		Free
8105.90.00.00	1	Other	[“kg”]	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8106	0	Bismuth and articles thereof, including waste and scrap:
8106.10.00.00	1	Containing more than 99.99 percent of bismuth, by weight	[“kg”]	Free		7.5%
8106.90.00.00	1	Other	[“kg”]	Free		7.5%
8108	0	Titanium and articles thereof, including waste and scrap:
8108.20.00	1	Unwrought titanium; powders		15%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	25%
8108.20.00.10	2	Sponge	[“kg”]
	2	Other:
8108.20.00.15	3	Powders	[“kg”]
8108.20.00.30	3	Ingots	[“kg”]
8108.20.00.95	3	Other	[“kg”]
8108.30.00.00	1	Waste and scrap	[“kg”]	Free		Free
8108.90	1	Other:
8108.90.30	2	Articles of titanium		5.5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8108.90.30.30	3	Castings	[“kg”]
8108.90.30.60	3	Other	[“kg”]
8108.90.60	2	Other		15%	Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8108.90.60.20	3	Blooms, sheet bars, and slabs	[“kg”]
8108.90.60.31	3	Other bars, rods, profiles and wire	[“kg”]
8108.90.60.45	3	Plates, sheets, strips and foil	[“kg”]
8108.90.60.60	3	Tubes and pipes	[“kg”]
8108.90.60.75	3	Other	[“kg”]
8109	0	Zirconium and articles thereof, including waste and scrap:
	1	Unwrought zirconium; powders:
8109.21.00.00	2	Containing less than 1 part hafnium to 500 parts zirconium by weight	[“kg”]	4.2%	Free (A+,AU,BH,CL,CO,D,E, IL,JO,KR,MA,OM,P, PA,PE,S,SG)	25%
8109.29.00.00	2	Other	[“kg”]	4.2%	Free (A+,AU,BH,CL,CO,D,E, IL,JO,KR,MA,OM,P, PA,PE,S,SG)	25%
	1	Waste and scrap:
8109.31.00.00	2	Containing less than 1 part hafnium to 500 parts zirconium by weight	[“kg”]	Free		Free
8109.39.00.00	2	Other	[“kg”]	Free		Free
	1	Other:
8109.91.00.00	2	Containing less than 1 part hafnium to 500 parts zirconium by weight	[“kg”]	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8109.99.00.00	2	Other	[“kg”]	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8110	0	Antimony and articles thereof, including waste and scrap:
8110.10.00.00	1	Unwrought antimony; powders	[“kg”]	Free		4.4¢/kg
8110.20.00.00	1	Waste and scrap	[“kg”]	Free		4.4¢/kg
8110.90.00.00	1	Other	[“kg”]	Free		4.4¢/kg
8111.00	0	Manganese and articles thereof, including waste and scrap:
8111.00.30.00	1	Waste and scrap	[“kg”]	Free		Free
	1	Other:
	2	Unwrought manganese:
8111.00.47.00	3	Flake containing at least 99.5 percent by weight manganese	[“kg”]	14%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA, OM,P,PA,PE,S,SG)	20%
8111.00.49	3	Other		14%	Free (A+,AU,BH,CL,CO,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	20%
8111.00.49.10	4	Powder containing at least 99.5 percent by weight manganese	[“kg”]
8111.00.49.90	4	Other	[“kg”]
8111.00.60.00	2	Other	[“kg”]	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8112	0	Beryllium, chromium, hafnium, rhenium, thallium, cadmium, germanium, vanadium, gallium, indium and niobium (columbium), and articles of these metals, including waste and scrap:
	1	Beryllium:
8112.12.00.00	2	Unwrought; powders	[“kg”]	8.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
8112.13.00.00	2	Waste and scrap	[“kg”]	Free		Free
8112.19.00.00	2	Other	[“kg”]	5.5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	1	Chromium:
8112.21.00.00	2	Unwrought; powders	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	30%
8112.22.00.00	2	Waste and scrap	[“kg”]	Free		Free
8112.29.00.00	2	Other	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	30%
	1	Hafnium:
8112.31.00.00	2	Unwrought; waste and scrap; powders	[“kg”]	Free		25%
8112.39.00.00	2	Other	[“kg”]	4%	Free(A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	1	Rhenium:
8112.41	2	Unwrought; waste and scrap; powders:
8112.41.10.00	3	Waste and scrap	[“kg”]	Free		Free
8112.41.50.00	3	Unwrought; powders	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
8112.49.00.00	2	Other	[“kg”]	4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	1	Thallium:
8112.51.00.00	2	Unwrought; powders	[“kg”]	4%	Free (A+,AU,BH,CL,CO,D,E, IL,JO,KR,MA,OM,P, PA,PE,S,SG)	25%
8112.52.00.00	2	Waste and scrap	[“kg”]	Free		Free
8112.59.00.00	2	Other	[“kg”]	4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
	1	Cadmium:
8112.61.00.00	2	Waste and scrap	[“kg”]	Free		33¢/kg
8112.69	2	Other:
8112.69.10.00	3	Unwrought cadmium; powders	[“kg”]	Free		33¢/kg
8112.69.90.00	3	Other	[“kg”]	4.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	1	Other:
8112.92	2	Unwrought; waste and scrap; powders:
8112.92.07.00	3	Waste and scrap	[“kg”]	Free		Free
	3	Other:
8112.92.10.00	4	Gallium	[“kg”]	3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
8112.92.30.00	4	Indium	[“kg”]	Free		25%
8112.92.40.00	4	Niobium (columbium)	[“kg”]	4.9%	Free (A+,AU,BH,CL,CO,D,E, IL,JO,KR,MA,OM,P, PA,PE,S,SG)	25%
	4	Germanium:
8112.92.60.00	5	Unwrought	[“kg”]	2.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
8112.92.65.00	5	Other	[“kg”]	4.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8112.92.70.00	4	Vanadium	[“kg”,”V kg”]	2%	Free (A+,AU,BH,CL,CO,D, E, IL,JO,KR,MA,OM,P, PA,PE,S,SG)	25%
8112.99	2	Other:
8112.99.10.00	3	Germanium	[“kg”]	4.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8112.99.20.00	3	Vanadium	[“kg”,”V kg”]	2%	Free (A+,AU,BH,CL,CO,D, E, IL,JO,KR,MA,OM,P, PA,PE,S,SG)	25%
8112.99.91.00	3	Other	[“kg”]	4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8113.00.00.00	0	Cermets and articles thereof, including waste and scrap	[“kg”]	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%

Chapter 82: Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal

HTS Number	Indent	Description	Unit of Quantity	General Rate of Duty	Special Rate of Duty	Column 2 Rate of Duty	Quota Quantity	Additional Duties
8201	0	Handtools of the following kinds and base metal parts thereof: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, bill hooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry:
8201.10.00.00	1	Spades and shovels, and parts thereof	[“No.”]	Free		30%
8201.30.00	1	Mattocks, picks, hoes and rakes, and parts thereof		Free		45%
8201.30.00.10	2	Mattocks and picks, and parts thereof	[“No.”]
8201.30.00.80	2	Other	[“No.”]
8201.40	1	Axes, bill hooks and similar hewing tools, and parts thereof:
8201.40.30.00	2	Machetes, and parts thereof	[“No.”]	Free		Free
8201.40.60	2	Other		6.2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8201.40.60.10	3	Axes and adzes, and parts thereof	[“No.”]
8201.40.60.80	3	Other	[“No.”]
8201.50.00.00	1	Secateurs and similar one-handed pruners and shears (including poultry shears), and parts thereof	[“No.”]	1¢ each + 2.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	20¢ each + 45%
8201.60.00.00	1	Hedge shears, two-handed pruning shears and similar two-handed shears, and parts thereof	[“No.”]	1¢ each + 2.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	20¢ each + 45%
8201.90	1	Other handtools of a kind used in agriculture, horticulture or forestry, and parts thereof:
8201.90.30.00	2	Grass shears, and parts thereof	[“No.”]	2¢ each + 5.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	20¢ each + 45%
8201.90.40.00	2	Forks, and parts thereof	[“No.”]	Free		15%
8201.90.60.00	2	Other	[“No.”]	Free		Free
8202	0	Handsaws, and metal parts thereof; blades for saws of all kinds (including slitting, slotting or toothless saw blades), and base metal parts thereof:
8202.10.00.00	1	Handsaws, and parts (except blades) thereof	[“No.”]	Free		20%
8202.20.00	1	Bandsaw blades, and parts thereof		Free		20%
8202.20.00.30	2	Metal cutting blades	[“No.”]
8202.20.00.60	2	Other	[“No.”]
	1	Circular saw blades (including slitting or slotting saw blades), and parts thereof:
8202.31.00.00	2	With working part of steel	[“No.”]	Free		25%
8202.39.00	2	Other, including parts		Free		25%
8202.39.00.10	3	With diamond working parts	[“No.”]
8202.39.00.40	3	Diamond sawblade cores	[“No.”]
8202.39.00.70	3	Other	[“No.”]
8202.40	1	Chain saw blades, and parts thereof:
8202.40.30.00	2	With cutting parts containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	[“No.”]	7.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8202.40.60	2	Other		Free		27.5%
8202.40.60.30	3	In continuous lengths	[“m”]
8202.40.60.60	3	Other	[“No.”]
	1	Other saw blades, and parts thereof:
8202.91	2	Straight saw blades, for working metal:
8202.91.30.00	3	Hacksaw blades	[“No.”]	Free		20%
8202.91.60.00	3	Other	[“gross”]	Free		40¢/gross
8202.99.00.00	2	Other (including parts)	[“No.”]	Free		20%
8203	0	Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal cutting shears, pipe cutters, bolt cutters, perforating punches and similar handtools, and base metal parts thereof:
8203.10	1	Files, rasps and similar tools:
8203.10.30.00	2	Not over 11 cm in length	[“doz.”]	Free		47.5¢/doz.
8203.10.60.00	2	Over 11 cm but not over 17 cm in length	[“doz.”]	Free		62.5¢/doz.
8203.10.90.00	2	Over 17 cm in length	[“doz.”]	Free		77.5¢/doz.
8203.20	1	Pliers (including cutting pliers), pincers, tweezers and similar tools, and parts thereof:
8203.20.20.00	2	Tweezers	[“No.”]	4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
	2	Other:
8203.20.40.00	3	Slip joint pliers	[“doz.”]	12%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8203.20.60	3	Other (except parts)		12¢/doz. + 5.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	$1.20/doz. + 60%
8203.20.60.30	4	Pliers	[“doz.”]
8203.20.60.60	4	Other	[“doz.”]
8203.20.80.00	3	Parts	[“No.”]	4.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8203.30.00.00	1	Metal cutting shears and similar tools, and parts thereof	[“No.”]	Free		50%
8203.40	1	Pipe cutters, bolt cutters, perforating punches and similar tools, and parts thereof:
8203.40.30.00	2	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	[“No.”]	6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8203.40.60.00	2	Other (including parts)	[“No.”]	3.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	50%
8204	0	Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); socket wrenches, with or without handles, drives or extensions; base metal parts thereof:
	1	Hand-operated spanners and wrenches, and parts thereof:
8204.11.00	2	Nonadjustable, and parts thereof		9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8204.11.00.30	3	Open-end, box and combination open-end and box wrenches	[“No.”]
8204.11.00.60	3	Other (including parts)	[“No.”]
8204.12.00.00	2	Adjustable, and parts thereof	[“No.”]	9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8204.20.00.00	1	Socket wrenches, with or without handles, drives and extensions, and parts thereof	[“No.”]	9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8205	0	Handtools (including glass cutters) not elsewhere specified or included; blow torches and similar self-contained torches; vises, clamps and the like, other than accessories for and parts of machine tools or water-jet cutting machines; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof:
8205.10.00.00	1	Drilling, threading or tapping tools, and parts thereof	[“No.”]	6.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8205.20	1	Hammers and sledge hammers, and parts thereof:
8205.20.30.00	2	With heads not over 1.5 kg each	[“No.”]	6.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8205.20.60.00	2	With heads over 1.5 kg each	[“No.”]	Free		20%
8205.30	1	Planes, chisels, gouges and similar cutting tools for working wood, and parts thereof:
8205.30.30.00	2	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	[“No.”]	5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8205.30.60.00	2	Other (including parts)	[“No.”]	5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8205.40.00.00	1	Screwdrivers, and parts thereof	[“No.”]	6.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 3.1% (JP)	45%
	1	Other handtools (including glass cutters) and parts thereof:
8205.51	2	Household tools, and parts thereof:
	3	Of iron or steel:
8205.51.15.00	4	Carving and butcher steels, with or without handles	[“No.”]	Free		8¢ each + 45%
8205.51.30	4	Other (including parts)		3.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
8205.51.30.30	5	Kitchen and table implements	[“No.”]
8205.51.30.60	5	Other (including parts)	[“No.”]
8205.51.45.00	3	Of copper	[“No.”]	Free		40%
8205.51.60.00	3	Of aluminum	[“kg”]	2.2¢/kg + 5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	19¢/kg + 40%
8205.51.75.00	3	Other	[“No.”]	3.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
8205.59	2	Other:
8205.59.10.00	3	Pipe tools, and parts thereof	[“No.”]	7.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 3.6% (JP)	45%
8205.59.20.00	3	Powder-actuated handtools, and parts thereof	[“No.”]	Free		27.5%
8205.59.30	3	Crowbars, track tools and wedges, and parts thereof		Free		3¢/kg
8205.59.30.10	4	Crowbars	[“kg”,”No.”]
8205.59.30.80	4	Other	[“kg”,”No.”]
	3	Other:
	4	Of iron or steel
8205.59.45.00	5	Caulking guns	[“No.”]	5.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
8205.59.55	5	Other		5.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
	6	Edged handtools:
8205.59.55.05	7	Single edge razor blades other than for shaving	[“No.”]
8205.59.55.10	7	Other	[“No.”]
8205.59.55.60	6	Other (including parts)	[“No.”]
8205.59.60.00	4	Of copper	[“No.”]	Free		40%
8205.59.70.00	4	Of aluminum	[“kg”]	1.5¢/kg + 3.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	19¢/kg + 40%
8205.59.80.00	4	Other	[“No.”]	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
8205.60.00.00	1	Blow torches and similar self-contained torches, and parts thereof	[“No.”]	2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8205.70.00	1	Vises, clamps and the like, and parts thereof		5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	2	Vises:
8205.70.00.30	3	Pipe	[“No.”]
8205.70.00.60	3	Other	[“No.”]
8205.70.00.90	2	Other (including parts)	[“No.”]
8205.90	1	Other, including sets of articles of two or more subheadings of this heading:
8205.90.10.00	2	Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof	[“No.”]	Free		6%
8205.90.60.00	2	Sets of articles of two or more of the foregoing subheadings	[“pcs”]	The rate of duty applicable to that article in the set subject to the highest rate of duty	Free (A+,AU,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	The rate of duty applicable to that article in the set subject to the highest rate of duty
8206.00.00.00	0	Tools of two or more of headings 8202 to 8205, put up in sets for retail sale	[“pcs”]	The rate of duty applicable to that article in the set subject to the highest rate of duty	Free (A+,AU,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	The rate of duty applicable to that article in the set subject to the highest rate of duty
8207	0	Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof:
	1	Rock drilling or earth boring tools, and parts thereof:
8207.13.00.00	2	With working part of cermets	[“No.”]	3.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8207.19	2	Other, including parts:
8207.19.30	3	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium		5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8207.19.30.30	4	Percussion rock drill bits	[“No.”]
	4	Other:
8207.19.30.60	5	Rotary rock drill bits, core bits and reamers	[“No.”]
8207.19.30.90	5	Other	[“No.”]
8207.19.60	3	Other		2.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	35%
8207.19.60.30	4	Percussion rock drill bits	[“No.”]
	4	Other:
	5	Rotary rock drill bits, core bits and reamers:
8207.19.60.65	6	With working part of diamonds	[“No.”]
8207.19.60.70	6	Other	[“No.”]
8207.19.60.90	5	Other	[“No.”]
8207.20.00	1	Dies for drawing or extruding metal, and parts thereof		3.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	30%
8207.20.00.30	2	Diamond wire drawing dies	[“No.”,”kg”]
8207.20.00.40	2	Other dies	[“No.”,”kg”]
8207.20.00.70	2	Parts	[“No.”,”kg”]
8207.30	1	Tools for pressing, stamping or punching, and parts thereof:
8207.30.30	2	Suitable for cutting metal, and parts thereof		5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.85% (JP)	60%
8207.30.30.20	3	Tools	[“No.”,”kg”]
8207.30.30.50	3	Parts	[“No.”,”kg”]
8207.30.60	2	Not suitable for cutting metal, and parts thereof		2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	35%
8207.30.60.32	3	Stamping dies not suitable for cutting metal	[“No.”,”kg”]
8207.30.60.62	3	Metal forming dies, including thread-rolling dies	[“No.”,”kg”]
8207.30.60.92	3	Other tools	[“No.”,”kg”]
8207.30.60.95	3	Parts	[“No.”,”kg”]
8207.40	1	Tools for tapping or threading, and parts thereof:
8207.40.30.00	2	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	[“No.”]	5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.85% (JP)	60%
8207.40.60.00	2	Other	[“No.”]	4.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	50%
8207.50	1	Tools for drilling, other than for rock drilling, and parts thereof:
8207.50.20	2	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium		5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	60%
8207.50.20.30	3	Masonry drills	[“No.”]
	3	Twist drills:
8207.50.20.45	4	Brad point	[“No.”]
8207.50.20.55	4	Other	[“No.”]
	3	Other:
8207.50.20.70	4	For woodworking	[“No.”]
8207.50.20.80	4	Other	[“No.”]
	2	Other:
8207.50.40	3	Suitable for cutting metal, and parts thereof		8.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	50%
8207.50.40.30	4	Twist drills	[“No.”]
8207.50.40.60	4	Other	[“No.”]
	3	Not suitable for cutting metal, and parts thereof:
8207.50.60.00	4	For handtools, and parts thereof	[“No.”]	5.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8207.50.80.00	4	Other	[“No.”]	2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
8207.60.00	1	Tools for boring or broaching, and parts thereof		4.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	60%
8207.60.00.30	2	Broaches	[“No.”]
8207.60.00.35	2	Reamers, except gun reamers	[“No.”]
8207.60.00.61	2	Other (including parts thereof)	[“No.”]
8207.70	1	Tools for milling, and parts thereof:
8207.70.30	2	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium		5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	60%
8207.70.30.30	3	End milling cutters	[“No.”]
8207.70.30.40	3	Router bits for woodworking	[“No.”]
8207.70.30.60	3	Other	[“No.”]
8207.70.60	2	Other		2.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	35%
8207.70.60.30	3	End milling cutters	[“No.”]
8207.70.60.40	3	Router bits not suitable for cutting metal	[“No.”]
8207.70.60.60	3	Other (including parts)	[“No.”]
8207.80	1	Tools for turning:
8207.80.30.00	2	With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium	[“No.”]	4.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8207.80.60.00	2	Other	[“No.”]	3.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35%
8207.90	1	Other interchangeable tools, and parts thereof:
8207.90.15.00	2	Files and rasps, including rotary files and rasps, and parts thereof	[“doz.”]	1.6%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	15%
	2	Other:
8207.90.30	3	Cutting tools with cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium		5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8207.90.30.30	4	Hobs and other gear cutting tools	[“No.”]
	4	For woodworking:
8207.90.30.75	5	Cutterheads with interchangeable tools	[“No.”]
8207.90.30.80	5	Other	[“No.”]
8207.90.30.85	4	Other	[“No.”]
	3	Other:
8207.90.45.00	4	Suitable for cutting metal, and parts thereof	[“No.”]	4.8%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	50%
	4	Not suitable for cutting metal, and parts thereof:
8207.90.60.00	5	For handtools, and parts thereof	[“No.”]	4.3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8207.90.75	5	Other		3.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	35%
8207.90.75.45	6	Cutterheads with interchangeable tools	[“No.”]
8207.90.75.85	6	Other	[“No.”]
8208	0	Knives and cutting blades, for machines or for mechanical appliances, and base metal parts thereof:
8208.10.00	1	For metal working, and parts thereof		Free		20%
8208.10.00.30	2	Over 30.5 cm in length, for metal shearing machines or over 15.2 cm in diameter for metal shearing/slitting machines	[“No.”]
8208.10.00.60	2	Other (including parts)	[“No.”]
8208.20.00	1	For wood working, and parts thereof		Free		20%
8208.20.00.30	2	Over 73.7 cm in length, for veneer-cutting machines	[“No.”]
8208.20.00.60	2	Over 15.2 cm in length, for wood-chipper machines	[“No.”]
8208.20.00.90	2	Other (including parts)	[“No.”]
8208.30.00	1	For kitchen appliances or for machines used by the food industry, and parts thereof		Free		20%
8208.30.00.30	2	For meat-slicing, meat-cutting or meat-chopping machines	[“No.”]
8208.30.00.60	2	Other (including parts)	[“No.”]
8208.40	1	For agricultural, horticultural or forestry machines, and parts thereof:
8208.40.30.00	2	Lawnmower blades	[“No.”]	Free		20%
8208.40.60.00	2	Other (including parts)	[“No.”]	Free		Free
8208.90	1	Other:
8208.90.30.00	2	For shoe machinery	[“No.”]	Free		Free
8208.90.60.00	2	Other (including parts)	[“No.”]	Free		20%
8209.00.00	0	Plates, sticks, tips and the like for tools, unmounted, of cermets		4.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	60%
8209.00.00.30	1	Of sintered metal carbides	[“kg”]
8209.00.00.60	1	Of other cermets	[“kg”]
8210.00.00.00	0	Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink, and base metal parts thereof	[“No.”]	3.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
8211	0	Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades and other base metal parts thereof:
8211.10.00.00	1	Sets of assorted articles	[“pcs”]	The rate of duty applicable to that article in the set subject to the highest rate of duty	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	The rate of duty appli- cable to that article in the set subject to the high- est rate of duty
	1	Other:
8211.91	2	Table knives having fixed blades:
8211.91.10.00	3	Knives with silver-plated handles	[“No.”]	Free		8¢ each + 45%
	3	Knives with stainless steel handles:
	4	With handles containing nickel or containing over 10 percent by weight of manganese:
8211.91.20.00	5	Valued under 25¢ each, not over 25.9 cm in overall length	[“pcs”]	0.4¢ each + 6.4%	Free (A+,AU,BH,CL,CO,D,E, IL,JO,KR,MA,OM,P,PA, PE,S,SG)	2¢ each + 45%
8211.91.25.00	5	Other	[“pcs”]	0.4¢ each + 6.8%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	2¢ each + 45%
	4	Other:
8211.91.30.00	5	Valued under 25¢ each, not over 25.9 cm in overall length	[“pcs”]	0.9¢ each + 10.6%	Free (AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	2¢ each + 45%
8211.91.40.00	5	Other	[“pcs”]	0.3¢ each + 3.7%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	2¢ each + 45%
8211.91.50	3	Knives with rubber or plastic handles		0.7¢ each + 3.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8211.91.50.30	4	Steak knives	[“No.”]
8211.91.50.60	4	Other	[“No.”]
8211.91.80	3	Other		0.3¢ each + 4.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8211.91.80.30	4	Steak knives	[“No.”]
8211.91.80.60	4	Other	[“No.”]
8211.92	2	Other knives having fixed blades:
	3	With rubber or plastic handles:
8211.92.20.00	4	Kitchen and butcher knives	[“No.”]	0.8¢ each + 4.6%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8211.92.40	4	Other		1¢ each + 4.6%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8211.92.40.50	5	Sheath-type knives	[“No.”]
8211.92.40.60	5	Other	[“No.”]
	3	Other:
8211.92.60.00	4	Hunting knives with wood handles	[“No.”]	4.4%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8211.92.90	4	Other		0.4¢ each + 6.1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8211.92.90.30	5	Kitchen and butcher knives	[“No.”]
8211.92.90.45	5	Sheath-type knives	[“No.”]
8211.92.90.60	5	Other	[“No.”]
8211.93.00	2	Knives having other than fixed blades		3¢ each + 5.4%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35¢ each + 55%
8211.93.00.31	3	Folding two-handled multi-use tools in which one or more tools are housed in each handle and one or more of the tools is a folding knife blade	[“No.”]
8211.93.00.35	3	Pen knives, pocket knives and other knives which have folding blades	[“No.”]
8211.93.00.60	3	Other (including parts)	[“No.”]
8211.94	2	Blades:
8211.94.10.00	3	For knives having fixed blades	[“No.”]	0.16¢ each + 2.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8211.94.50.00	3	Other	[“No.”]	1¢ each + 5.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	11¢ each + 55%
8211.95	2	Handles of base metal:
8211.95.10.00	3	For table knives having fixed blades	[“No.”]	0.3¢ each + 4.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8211.95.50.00	3	For other knives having fixed blades	[“No.”]	0.4¢ each + 6.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8211.95.90.00	3	Other	[“No.”]	3¢ each + 5.4%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	35¢ each + 55%
8212	0	Razors and razor blades (including razor blade blanks in strips), and base metal parts thereof:
8212.10.00.00	1	Razors	[“No.”]	Free		10¢ each + 30%
8212.20.00	1	Safety razor blades, including razor blade blanks in strips		Free		1¢ each + 30%
8212.20.00.05	2	Single edge razor blades for shaving	[“No.”]
8212.20.00.10	2	Other	[“No.”]
8212.90.00.00	1	Other parts	[“No.”]	Free		27.5%
8213.00	0	Scissors, tailors’ shears and similar shears, and blades and other base metal parts thereof:
8213.00.30.00	1	Valued not over $1.75/dozen	[“No.”]	1.7¢ each + 4.3%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	15¢ each + 45%
	1	Valued over $1.75/dozen:
8213.00.60.00	2	Pinking shears, valued over $30/dozen	[“No.”]	8¢ each + 8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	20¢ each + 45%
8213.00.90.00	2	Other (including parts)	[“No.”]	3¢ each + 3%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	20¢ each + 45%
8214	0	Other articles of cutlery (for example, hair clippers, butchers’ or kitchen cleavers, chopping or mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files); base metal parts thereof:
8214.10.00.00	1	Paper knives, letter openers, erasing knives, pencil sharpeners (nonmechanical) and blades and other parts thereof	[“No.”]	0.3¢ each + 4.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8214.20	1	Manicure or pedicure sets and instruments (including nail files), and parts thereof:
8214.20.30.00	2	Cuticle or cornknives, cuticle pushers, nail files, nailcleaners, nail nippers and clippers, all the foregoing used for manicure or pedicure purposes, and parts thereof	[“No.”]	4%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
	2	Manicure and pedicure sets, and combinations thereof:
8214.20.60.00	3	In leather containers	[“No.”]	Free		50%
8214.20.90.00	3	Other	[“No.”]	4.1%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8214.90	1	Other:
	2	Cleavers and the like not elsewhere specified or included:
8214.90.30.00	3	Cleavers with their handles	[“No.”]	1¢ each + 4.9%	Free (A+,AU,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	8¢ each + 45%
8214.90.60.00	3	Other	[“No.”]	0.2¢ each + 3.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8214.90.90.00	2	Other (including parts)	[“No.”]	1.4¢ each + 3.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	20¢ each + 45%
8215	0	Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware; and base metal parts thereof:
8215.10.00.00	1	Sets of assorted articles containing at least one article plated with precious metal	[“pcs”]	The rate of duty applicable to that article in the set subject to the highest rate of duty	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	The rate of duty applicable to that article in the set subject to the highest rate of duty
8215.20.00.00	1	Other sets of assorted articles	[“pcs”]	The rate of duty applicable to that article in the set subject to the highest rate of duty	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	The rate of duty applicable to that article in the set subject to the highest rate of duty
	1	Other:
8215.91	2	Plated with precious metal:
8215.91.30.00	3	Forks	[“No.”]	Free		2¢ each + 45%
8215.91.60.00	3	Spoons and ladles	[“No.”]	4.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	50%
8215.91.90.00	3	Other (including parts)	[“No.”]	2.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
8215.99	2	Other:
	3	Forks:
	4	With stainless steel handles:
	5	With handles containing nickel or containing over 10 percent by weight of manganese:
8215.99.01.00	6	Valued under 25¢ each, not over 25.9 cm in overall length	[“pcs”]	0.9¢ each + 15.8%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	2¢ each + 45%
8215.99.05.00	6	Other	[“pcs”]	0.5¢ each + 8.5%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	2¢ each + 45%
	5	Other:
8215.99.10.00	6	Valued under 25¢ each	[“pcs”]	0.5¢ each + 6.3%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	2¢ each + 45%
8215.99.15.00	6	Other	[“pcs”]	0.4¢ each + 4.8%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	2¢ each + 45%
8215.99.20.00	4	With rubber or plastic handles	[“No.”]	0.5¢ each + 3.2%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
	4	Other:
8215.99.22.00	5	Without their handles	[“No.”]	Free		8¢ each + 45%
	5	Other:
8215.99.24.00	6	Table forks (including table serving forks) and barbecue forks with wooden handles	[“No.”]	0.3¢ each + 4.5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	8¢ each + 45%
8215.99.26.00	6	Other	[“No.”]	0.2¢ each + 3.1%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	8¢ each + 45%
	3	Spoons and ladles:
	4	With stainless steel handles:
8215.99.30.00	5	Spoons valued under 25¢ each	[“pcs”]	14%	Free (A+,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
8215.99.35.00	5	Other	[“pcs”]	6.8%	Free (AU,BH, CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	40%
8215.99.40	4	With base metal (except stainless steel) or nonmetal handles		5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%
8215.99.40.30	5	Tablespoons and table ladles	[“No.”]
8215.99.40.60	5	Other	[“No.”]
8215.99.45.00	4	Other	[“No.”]	Free		65%
8215.99.50.00	3	Other (including parts)	[“No.”]	5.3%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	40%

Chapter 83: Miscellaneous articles of base metal

HTS Number	Indent	Description	Unit of Quantity	General Rate of Duty	Special Rate of Duty	Column 2 Rate of Duty	Quota Quantity	Additional Duties
8301	0	Padlocks and locks (key, combination or electrically operated), of base metal; clasps and frames with clasps, incorporating locks, of base metal; keys and parts of any of the foregoing articles, of base metal:
8301.10	1	Padlocks:
	2	Not of cylinder or pin tumbler construction:
8301.10.20.00	3	Not over 3.8 cm in width	[“doz.”]	2.3%	Free (A+,AU,BH,CL,CO,D,E, IL,JO,KR,MA,OM,P,PA, PE,S,SG)	39.5%
8301.10.40.00	3	Over 3.8 cm but not over 6.4 cm in width	[“doz.”]	3.8%	Free (A+,AU,BH,CL,CO,D,E, IL,JO,KR,MA,OM,P,PA, PE,S,SG)	29.5%
8301.10.50.00	3	Over 6.4 cm in width	[“doz.”]	3.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	28.5%
	2	Of cylinder or pin tumbler construction:
8301.10.60	3	Not over 3.8 cm in width		6.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	27%
8301.10.60.20	4	Lock bodies containing hardened steel components with attached (or insertable) flexible cable composed of wire strands and hardened steel beads	[“doz.”]
8301.10.60.80	4	Other	[“doz.”]
8301.10.80.00	3	Over 3.8 cm but not over 6.4 cm in width	[“doz.”]	4.8%	Free (A+,AU,BH,CL,CO,D,E, IL,JO,KR,MA,OM,P,PA, PE,S,SG)	36%
8301.10.90.00	3	Over 6.4 cm in width	[“doz.”]	4.2%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	29.5%
8301.20.00	1	Locks of a kind used on motor vehicles		5.7%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8301.20.00.30	2	Non-integral steering wheel immobilizer devices	[“doz.”]
8301.20.00.60	2	Other	[“kg”]
8301.30.00	1	Locks of a kind used for furniture		5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8301.30.00.60	2	Cam locks and other locks suitable for use with chests, drawers and similar items	[“kg”]
8301.30.00.90	2	Other	[“kg”]
8301.40	1	Other locks:
8301.40.30.00	2	Luggage locks	[“doz.”]	3.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	45%
8301.40.60	2	Other		5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 2.85% (JP)	45%
8301.40.60.30	3	Door locks, locksets and other locks suitable for use with interior or exterior doors (except garage, overhead or sliding doors)	[“kg”]
8301.40.60.60	3	Other	[“kg”]
8301.50.00.00	1	Clasps and frames with clasps, incorporating locks	[“kg”]	3.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8301.60.00.00	1	Parts	[“kg”]	2.8%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	45%
8301.70.00.00	1	Keys presented separately	[“kg”]	4.5%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,JP,KR,MA,OM,P,PA,PE,S,SG)	45%
8302	0	Base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal; and base metal parts thereof:
8302.10	1	Hinges, and parts thereof:
	2	Of iron or steel, of aluminum or of zinc:
8302.10.30.00	3	Designed for motor vehicles	[“kg”]	2%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
8302.10.60	3	Other		3.5%	Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8302.10.60.30	4	Suitable for interior and exterior doors (except garage, overhead or sliding doors)	[“kg”]
8302.10.60.60	4	Suitable for furniture and cabinets	[“kg”]
8302.10.60.90	4	Other	[“kg”]
8302.10.90	2	Other		3.4%	Free (A*,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8302.10.90.30	3	Suitable for interior and exterior doors (except garage, overhead or sliding doors)	[“kg”]
8302.10.90.60	3	Suitable for furniture and cabinets	[“kg”]
8302.10.90.90	3	Other	[“kg”]
8302.20.00.00	1	Castors, and parts thereof	[“kg”]	5.7%	Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8302.30	1	Other mountings, fittings and similar articles suitable for motor vehicles; and parts thereof:
8302.30.30	2	Of iron or steel, of aluminum or of zinc		2%	Free (A*,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	25%
8302.30.30.10	3	Pneumatic cylinders for lifting, lowering, dampening or counter-balancing	[“No.”]
8302.30.30.60	3	Other	[“kg”]
8302.30.60.00	2	Other	[“kg”]	3.5%	Free (A+,AU,B,BH,CL,CO,D,E,IL, JO,KR,MA, OM,P,PA,PE,S,SG)	45%
	1	Other mountings, fittings and similar articles, and parts thereof:
8302.41	2	Suitable for buildings:
8302.41.30.00	3	Door closers (except automatic door closers), and parts thereof	[“kg”]	3.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	3	Other:
8302.41.60	4	Of iron or steel, of aluminum or of zinc		3.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	5	Suitable for interior and exterior doors (except garage, overhead or sliding doors):
8302.41.60.15	6	Doorstops, chain door fasteners, door pulls, kick plates, door knockers and escutcheons	[“kg”]
8302.41.60.45	6	Other	[“kg”]
8302.41.60.50	5	For curtains, draperies and window shades	[“kg”]
8302.41.60.80	5	Other	[“kg”]
8302.41.90	4	Other		3.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	5	Suitable for interior and exterior doors (except garage, overhead or sliding doors):
8302.41.90.15	6	Doorstops, chain door fasteners, door pulls, kick plates, door knockers and escutcheons	[“kg”]
8302.41.90.45	6	Other	[“kg”]
8302.41.90.50	5	For curtains, draperies and window shades	[“kg”]
8302.41.90.80	5	Other	[“kg”]
8302.42	2	Other, suitable for furniture:
8302.42.30	3	Of iron or steel, of aluminum or of zinc		3.9%	Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8302.42.30.10	4	Pneumatic cylinders for lifting, lowering, dampening or counterbalancing	[“No.”]
8302.42.30.15	4	Drawer slides	[“kg”]
8302.42.30.65	4	Other	[“kg”]
8302.42.60.00	3	Other	[“kg”]	3.4%	Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8302.49	2	Other:
	3	Harness and saddlery or riding-bridle hardware, and parts thereof:
8302.49.20.00	4	Coated or plated with precious metal	[“kg”]	7.5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	60%
8302.49.40.00	4	Other	[“kg”]	Free		50%
	3	Other:
8302.49.60	4	Of iron or steel, of aluminum or of zinc		5.7%	Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8302.49.60.35	5	Pneumatic cylinders for lifting, lowering, dampening or counterbalancing	[“No.”]
	5	Other:
8302.49.60.45	6	For railway vehicles	[“kg”]
8302.49.60.55	6	For aircraft, vessels and other vehicles (except motor vehicles) of section XVII	[“kg”]
8302.49.60.85	6	Other	[“kg”]
8302.49.80	4	Other		3.5%	Free (A*,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	5	For railway vehicles, aircraft, vessels and other vehicles (except motor vehicles) of section XVII:
8302.49.80.40	6	Of copper	[“kg”]
8302.49.80.50	6	Other	[“kg”]
8302.49.80.90	5	Other	[“kg”]
8302.50.00.00	1	Hat-racks, hat pegs, brackets and similar fixtures, and parts thereof	[“kg”]	Free		40%
8302.60	1	Automatic door closers, and parts thereof:
8302.60.30.00	2	Automatic door closers	[“kg”]	3.9%	Free (A,AU,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8302.60.90.00	2	Parts	[“kg”]	3.1%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8303.00.00.00	0	Armored or reinforced safes, strong-boxes and doors and safe deposit lockers for strong-rooms, cash or deed boxes and the like, and parts thereof, of base metal	[“kg”]	3.8%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8304.00.00.00	0	Desk-top filing or card-index cabinets, paper trays, paper rests, pen trays, office-stamp stands and similar office or desk equipment and parts thereof, of base metal, other than office furniture of heading 9403	[“kg”]	3.9%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8305	0	Fittings for looseleaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, and parts thereof, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal:
8305.10.00	1	Fittings for looseleaf binders or files		2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8305.10.00.10	2	Ring binder mechanisms	[“kg”]
8305.10.00.50	2	Other	[“kg”]
8305.20.00.00	1	Staples in strips	[“kg”]	Free		4%
8305.90	1	Other, including parts:
8305.90.30	2	Paper clips, and parts thereof		Free		45%
8305.90.30.10	3	Wholly of wire	[“kg”]
8305.90.30.50	3	Other	[“kg”]
8305.90.60.00	2	Other	[“kg”]	5.7%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8306	0	Bells, gongs and the like, nonelectric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal; and base metal parts thereof:
8306.10.00.00	1	Bells, gongs and the like, and parts thereof	[“kg”]	5.8%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	50%
	1	Statuettes and other ornaments, and parts thereof:
8306.21.00.00	2	Plated with precious metal, and parts thereof	[“kg”]	4.5%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	65%
8306.29.00.00	2	Other	[“kg”]	Free		46%
8306.30.00.00	1	Photograph, picture or similar frames; mirrors; and parts thereof	[“kg”]	2.7%	Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8307	0	Flexible tubing of base metal, with or without fittings:
8307.10	1	Of iron or steel:
8307.10.30.00	2	With fittings	[“kg”]	3.8%	Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	30%
8307.10.60.00	2	Other	[“kg”]	3.8%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	30%
8307.90	1	Of other base metal:
8307.90.30.00	2	With fittings	[“kg”]	3.8%	Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	30%
8307.90.60.00	2	Other	[“kg”]	3.8%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	30%
8308	0	Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing or clothing accessories, footwear, jewelry, wrist watches, books, awnings, leather goods, travel goods or saddlery or for other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal:
8308.10.00.00	1	Hooks, eyes and eyelets	[“kg”]	1.1¢/kg + 2.9%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	10¢/kg + 25%
8308.20	1	Tubular or bifurcated rivets:
8308.20.30.00	2	Of iron or steel and not brightened, not lathed and not machined	[“kg”]	Free		2.2¢/kg
8308.20.60.00	2	Other	[“kg”]	Free		45%
8308.90	1	Other, including parts:
8308.90.30.00	2	Beads and spangles of base metal	[“kg”]	Free		40%
8308.90.60.00	2	Buckles and buckle clasps, and parts thereof	[“kg”]	3.9%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
8308.90.90.00	2	Other	[“kg”]	2.7%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	65%
8309	0	Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, and parts thereof, of base metal:
8309.10.00.00	1	Crown corks (including crown seals and caps), and parts thereof	[“kg”]	Free		45%
8309.90.00	1	Other		2.6%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	45%
	2	Of aluminum:
8309.90.00.20	3	For cans of a kind used for the conveyance of beverages as described in statistical note 1 to this chapter	[“kg”,”No.”]
8309.90.00.25	3	Other	[“kg”,”No.”]
	2	Other:
8309.90.00.80	3	Of steel	[“kg”,”No.”]
8309.90.00.85	3	Other	[“kg”,”No.”]
8310.00.00.00	0	Sign plates, name plates, address plates and similar plates, numbers, letters and other symbols, and parts thereof, of base metal, excluding those of heading 9405	[“kg”]	Free		45%
8311	0	Wire, rods, tubes, plates, electrodes and similar products of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying; base metal parts thereof:
8311.10.00.00	1	Coated electrodes of base metal, for electric arc-welding	[“kg”]	Free		35%
8311.20.00.00	1	Cored wire of base metal, for electric arc-welding	[“kg”]	Free		35%
8311.30	1	Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame:
8311.30.30.00	2	Lead-tin solders	[“kg”,”Pb kg”]	Free		2.5¢/kg on lead content
8311.30.60.00	2	Other	[“kg”]	Free		35%
8311.90.00.00	1	Other	[“kg”]	Free		35%

U.S. & China Ease Trade Tensions After Busan Summit (Updated 10/30)

HTS – Section Fifteen

Section Fifteen:
Base Metals and Articles of Base Metal

CORPORATE HEADQUARTERS

U.S. & China Ease Trade Tensions After Busan Summit (Updated 10/30)

HTS – Section Fifteen

Section Fifteen: Base Metals and Articles of Base Metal

Section Fifteen:
Base Metals and Articles of Base Metal